General Product Question
I have a 323R that came with the trimmer head installed. I...Answeredescalated
General Product Question posted September 6, 2011 by Dan Rikard, last edited February 10, 2012
657 Views, 1 Comment
Question:
I have a 323R that came with the trimmer head installed. I bought the brushcutter blade kit to install. I got the trimmer head off (finally). I can't figure out how a 1" hole on the blade is supposed to sit on the shaft. There is nothing to hold the blade in place. Is there a part I am missing? Thanks.
Best Answer
Answer
Thank you for contacting the AnswerARMY.
Because of the inherent danger of using a blade, please contact your local authorized Husqvarna to help you install the blade for the first time so you can see how this is done properly. Make sure you use all the safety items such as the harness and the shield, read and understand how to properly use the blade in grasses.
Also your operators manual should have guidance for installing the blade as well.
Thank you for contacting the AnswerARMY.
Because of the inherent danger of using a blade, please contact your local authorized Husqvarna to help you install the blade for the first time so you can see how this is done properly. Make sure you use all the safety items such as the harness and the shield, read and understand how to properly use the blade in grasses.
Also your operators manual should have guidance for installing the blade as well.