General Product Question
I HAVE A K750 POWER SAW AND KEEP HAVING TO REPLACE THE ARBOR...Answeredescalated
General Product Question posted November 3, 2011 by TODD SPRENGER, last edited February 10, 2012
388 Views, 1 Comment
Question:
I HAVE A K750 POWER SAW AND KEEP HAVING TO REPLACE THE ARBOR
BUSHING GOES OUT ON A COUPLE RENTALS AND COMES BACK AND THE BUSHING IS WORN OUT ON THE INSIDE AND SHOWS SIGNS THAT THE BLADE IS SLIPPING ON THE OUTSIDE. IS IT POSSIBLE THAT THE 2 OUTER CUPS ARE WORN AND NOT KEEPING THE BLADE LOOCKED DOWN?
BUSHING GOES OUT ON A COUPLE RENTALS AND COMES BACK AND THE BUSHING IS WORN OUT ON THE INSIDE AND SHOWS SIGNS THAT THE BLADE IS SLIPPING ON THE OUTSIDE. IS IT POSSIBLE THAT THE 2 OUTER CUPS ARE WORN AND NOT KEEPING THE BLADE LOOCKED DOWN?
Best Answer
Answer
Hi Todd,
Thank you for contacting Husqvarna.
In the rental world anything is possible. As you have so many different people using the same piece of equipment and they don't always put it together properly after changing the blade. I would recommend changing out all parts for the blade mounting to get a proper fit. Hopefully that will fix your problem.
Hope this helps and thank you for using our products.
Hi Todd,
Thank you for contacting Husqvarna.
In the rental world anything is possible. As you have so many different people using the same piece of equipment and they don't always put it together properly after changing the blade. I would recommend changing out all parts for the blade mounting to get a proper fit. Hopefully that will fix your problem.
Hope this helps and thank you for using our products.