My bar adjust pin broke on a pp5020av. How do you get the screw out to install the new pin? It seems like you would just be able to unscrew the whole thing, but it just keeps turning in the housing.
You will need to pull off the clutch cover first. Make sure the blade brake is disengaged. Once off you should see the pin and all it's hardware. It should be pretty straight forward from there.
You will need to pull off the clutch cover first. Make sure the blade brake is disengaged. Once off you should see the pin and all it's hardware. It should be pretty straight forward from there.
Hi Christopher,
You will need to pull off the clutch cover first. Make sure the blade brake is disengaged. Once off you should see the pin and all it's hardware. It should be pretty straight forward from there.
Regards,
Chip