This is a public Forum  public

General Product Question

    ROBERT LAMKE
    I HAVE A MODEL 223L TRIMMER, AND AFTER ABOUT 15 MINUTES...Answeredescalated
    General Product Question posted July 18, 2011 by ROBERT LAMKE, last edited February 10, 2012 
    929 Views, 1 Comment
    Question:
    I HAVE A MODEL 223L TRIMMER, AND AFTER ABOUT 15 MINUTES RUNNIG IT DIES OUT AND WILL NOT START AGAIN UNTIL IT COOLS DOWN. I THINK THE COIL IS GOING BAD. WHAT DO YOU THINK IT IS.
    • Be the first to rate this

      |

    • Bookmark and Share

    Best Answer

    Scott W.

    Thank you for contacting the AnswerARMY.

    The problem you describe could be the ignition coil, fuel cap ( not venting ) or something else fuel system related.

    If it is the ignition system as long as you are the original purchaser and have your dated sales receipt, and depending on the age of the machine as well as how it is used. The ignition module is warrantable although the labor may not be. All wwarranty work must be completed by a servicing dealer. With out an original dated sales receipt warranty is not allowed.

    Please take the unit to yoru local authorized service center to have the machine repaired.

    Answer

     

    • Scott W.

      Thank you for contacting the AnswerARMY.

      The problem you describe could be the ignition coil, fuel cap ( not venting ) or something else fuel system related.

      If it is the ignition system as long as you are the original purchaser and have your dated sales receipt, and depending on the age of the machine as well as how it is used. The ignition module is warrantable although the labor may not be. All wwarranty work must be completed by a servicing dealer. With out an original dated sales receipt warranty is not allowed.

      Please take the unit to yoru local authorized service center to have the machine repaired.

      • Be the first to rate this

        |