Posts
Parts Question posted February 14, 2012 by Robert GoodmanQuestion:Where can I get a repair/rebuild kit for the starter's bendix gear set or a new starter? I bought a HV 10530SBE snowblower in 2006 with a Briggs and Stratton 10.5HP OHV "Power Built Snow" engine. It has a Fasco electric starter 524-975-0. The starter is 120V AC and the "case" measures 3 1/2 inches without the end castings. I can not find the engine model number anywhere. I have taken off every trim and cover plate I could and still no model number on the block or valve cover or anywhere else. I have tried B&S and Fasco but they all want an engine model number. A classic catch 22 situation. Thanks- Parts Question posted October 10, 2014 by KevinQuestion:Missing Parts for 12527HVX snow thrower. I bought a Husqvarna model 12527HVX (serial 081913M 000738) last winter and it was missing the mounting hardware for the chute extension. I went to the dealer (Lowes) and they said they couldn't help, that I should contact Husqvarna. I called the missing parts phone number and worked with a customer service rep who asked for scanned images of the installation instructions showing the missing parts. I responded but never heard back. A copy of our correspondence is attached. The missing parts phone number no longer works. I'd still like to have the parts to complete my machine. I tried Husqvarna customer support again and was directed here. I need the small metal bars and screws to attach the chute extension. I could make the parts myself, but would like to have the ones that should have been supplied with the machine. Thanks for your help!
- Parts Question posted November 28, 2011 by Bob ScarffQuestion:I recently purchased a 1830EXL and was told Husqvarna's high performance impeller kit (#532187724) would fit the 27" and 30" models. Well, it doesn't fit the 30" model. The hole diameter of the new impeller pulley is much smaller then the diameter of the engine crankshaft. My question is, does Husqvarna make a high performance impeller kit that works on their 1830EXL 30" model? Thanks, Bob
- Parts Question posted October 31, 2011 by David BrienQuestion:Hi! I have a 10530sbe snow thrower. I have a problem with the chute assembly. I believe the broken part (the plastic is broken where the cable ball inserts and holds it securly) is the "pulley pivot" but am unable to find this part specific to the 10530.
Any help would be great;y appreciated!
Dave - Parts Question posted December 28, 2015 by Michael StudleyQuestion:I just purchased a Husqvarna st230p snow blower and it does not have an oil dip stick to tell when you are low on oil. Does anyone know if there is a dip stick for this model ?
thank you
m - Parts Question posted October 18, 2011 by Peter MorvilleQuestion:How can I get a remote cable bracket? My 924HV snow thrower arrived from Amazon without this part. It's listed on pg. 7 of the operator's manual (FIG. 8), but when I called customer service, they couldn't find it. Help! Thanks!
- Parts Question posted November 13, 2012 by Ken MitchellQuestion:10530SBE Shear bolt kit discontinued?
- Parts Question posted December 3, 2011 by Jody PodporaQuestion:10530SBE snowthrower: Cab and Tire Chains Husqvarna part numbers??
- Parts Question posted November 22, 2011 by John KeatingQuestion:I have a 1830 HV snowblower do they make a Hi performance Impeller Kit for it?This one has a 1in engine shaft
I put the 532187724 on my other snow blower.That had a 3/4in engine shaft.
Does Husqvarna make anything to fit the 1830HV - Parts Question posted October 30, 2011 by jennifer dayQuestion:how do you order parts on here foe your snow thrower?