Comments
- posted October 13, 2011 in Husqvarna: Ask & Answer > Riding Lawn Mowers
- Permalink
Thank you for contacting the Answer Army.
These tractors are very similar in technical specifications. About the only difference in them besides some cosmetic differences are the following.
The YTH23V48 has a turning radius of 16" while the YTH2348 has a radius of 18"
The YTH23V48 has a premium seat while the YTH2348 has a standard seat.
- posted October 13, 2011 in Husqvarna: Ask & Answer > Hedge Trimmers
- Permalink
Thank you for contacting the Answer Army.
No, Husqvarna doesn't make available a hedge trimmer attachment for the 327P5X. Husqvarna doesn't recommend any type of attachment. Husqvarna advise is that no modifications be made to this unit.
- posted October 13, 2011 in Husqvarna: Ask & Answer > Leaf Blowers
- Permalink
Thank you for contacting the Answer Army.
The model 350bt has replaced the 150bt model. The shrouds and blower tubes of the 350bt have been updated to increase performance. The 350bt is an excellent blower and will give you optimum performance and reliability.
- posted October 13, 2011 in Weed Eater: Ask & Answer > Weed Eater One
- Permalink
Thank you for contacting Answer Army.
Sorry you are having issues with your Weedeater One mower.
Please contact customer service at 800-753-4943.
- posted October 13, 2011 in Husqvarna: Ask & Answer > Zero Turn Mowers
- Permalink
Thank you for contacting the Answer Army.
Sorry you are having issues with the bagger/collection system on your RZ4623.
In 2009, there was a frame redesign on the RZ mowers. With an new mower frame the collection system changed also.
What is the serial number on your mower? Does it start out 07 or 08 or 09 or 10 ?
07 meaning mower manufactured 2007, 08 meaning mower manufactured in 2008, 09 meaning mower manufactured in 2009, 10 meaning mower manufactured 2010
If the serial number starts out 07 or 08---the part number for the bagger/collection system is 968999746
If the serial number starts up 09, 10, or 11---the part number for the bagger/collection system is 966004101
If you have the correct bagger/collection system for the correct year, assembly may be an issue. Sometimes assembly of baggers/collections systems can be difficult.
Please contact an authorized Husqvarna dealer in your area for assistance.
- posted October 13, 2011 in Husqvarna: Ask & Answer > Riding Lawn Mowers
- Permalink
Thank you for contacting Answer Army.
Sorry you are having issues with your Husqvarna mowers.
Extended use of the mower on an incline greater than 15° will result in possible engine damage.
Mow up and down slopes (15° Max), not across.
Maintenance of the engine oil is also critical. Dirty oil, low or no oil in the engine will cause catastrophic failure.
- posted October 13, 2011 in Husqvarna: Ask & Answer > Leaf Blowers
- Permalink
Thank you for contacting the Answer Army.
Sorry for the delayed response.
Yes, Husqvarna XP and Husqvarna Low Smoke Two stroke oil meets ISO and JASO standards for high rpm & high performance 2 stroke engines.
- posted October 13, 2011 in Weed Eater: Ask & Answer > Weed Eater One
- Permalink
Thank you for contacting the Answer Army.
Sorry you are having issues with your Weedeater One Riding Mower.
Because of nature of the issues that you are having with this mower, please contact a authorized Weedeater serving dealer in your area.
A dealer locater can be found my logging onto www.weedeater.com
- posted October 13, 2011 in Weed Eater: Ask & Answer > Walk-Behind Mowers
- Permalink
Thank you for contacting the Answer Army.
Sorry you did not get an owner's manual with your Weedeater push mowers.
Your owner's manual is attached to this response.
961380017 owners manual.pdf (1.5MB)- posted October 13, 2011 in Husqvarna: Ask & Answer > Chainsaws
- Permalink
Thank you for contacting the Answer Army.
Sorry you are having issues with your 327P5X pole saw.
Because of the nature of this issue, please contact an authorized Husqvarna dealer in your area for evaluation and repair.
- posted October 13, 2011 in Husqvarna: Ask & Answer > Chainsaws
- Permalink
Thank you for contacting the Answer Army.
Blowing compressed air thru the carburetor WILL damage internal parts, especially the check valve disc in the center of the carburetor.
After carburetors are taken apart, they should be "rebuilt". This means cleaning the carburetor and then installing new gaskets, diaphrams, screen, fuel inlet needle and other components. Usually these parts come in a kit.
Carburetor adjustment is also very critical.
Use a 2 stroke air cooled engine oil that is JASO FD rated and 89 or higher octane gas at a 50:1 mix ratio.
Do not store this oil/gas mix for longer than 30 days. 60 days if a fuel stabilizer is used.
Please contact an authorized Husqvarna dealer in your area for evaluation and repair.
- posted October 13, 2011 in Husqvarna: Ask & Answer > Walk Behind Lawn Mowers
- Permalink
Thank you for contacting the Answer Army.
Kohler engines says "NO" to the API SN oil. The SN additive package is wrong fo your Kohler engine. Review the Kohler engines owner's manual for the correct oil.
Contact an authorized Husqvarna dealer in your area for Kohler engine oil and parts.
- posted October 11, 2011 in Husqvarna: Ask & Answer > Chainsaws
- Permalink
Thank you for contacting the Answer Army.
The "G" in XPG stands for generator. A saw with the "G" designation means there will have a heated handle and/or carburetor.
- posted October 11, 2011 in Husqvarna: Ask & Answer > Chainsaws
- Permalink
Thank you for contacting the Answer Army.
Sorry you are having issues with your 450e chain saw.
Sounds like two of the three issues you have with this chain saw may come from cutting with a dull chain.
Saw chains can get very dull, very fast depending on how the chain is used. Cutting old dry hardwood such as oak will dull a chain quickly. Add to this that if cutting near the ground and the chain contacts the ground, a dull chain can happen within minutes.
The fuel line coming off could be a case where the chain is dull and extra pressure is exerted to make the cut. This pulls the handle away (in a undercut) and could result in the fuel line coming off.
Hot restart of the 450e chain saw could be a variety of issues. From incorrect mix oil and low octane gas or carburetor adjustment or incorrect spark plug or spark plug gap.
Please contact an authorized Husqvarna dealer in your area for evaluation and repair.
- posted October 11, 2011 in Husqvarna: Ask & Answer > Leaf Blowers
- Permalink
Thank you for contacting the Answer Army.
Yes, both the 125B and the 130BT blowers are 2 Stroke. Meaning you must mix 2 Stroke Air cooled engine oil with 89 octane or higher gas.
When the engine is warm, the choke must be run in the open position. If the warm engine is run in the closed position, the engine will "flood". This means too much oil/gas mix into the engine.