Chainsaws

Folks: I used a new Husqvarna 240E 16-Inch 38.2cc X-Torq 2-Cycle Gas Powered Chain Saw for the first time yesterday. A friend and I gassed and oiled it - started it and on the first cut the chain bar fell to the ground. Obviously disconcerting to a new user. The two nuts were clearly not torqued correctly. I should have checked the nuts before using the device but did not. Nut checking may be a step you would want to add to the quick start guide. Once we repaired the device I was able to complete my chores. Note the device was purchased from Amazon last fall but not started or used until yesterday. Thanks for checking this out.