Husqvarna: Ask & Answerpublic

Chainsaws

 
This is a public Forum  public

Service & Maintenance Question

    Garrett Moe
    I have a 2008 Husqvarna 372xp I am looking for the torque...Answeredescalated
    Service & Maintenance Question posted January 26, 2012 by Garrett Moe, last edited February 10, 2012 
    1407 Views, 1 Comment
    Question:
    I have a 2008 Husqvarna 372xp I am looking for the torque specs for this machine. I need the flywheel, clutch, crankcase and the cyclinder.
    Thanks Garrett

    • Be the first to rate this

      |

    • Bookmark and Share

    Best Answer

    Greg P.

    Moe

    Thanks for the question. The specs you are needing are as follows:

    flywheel nut 35 nm

    crankcase 8 nm

    cyl 10 nm

    Clutch says use piston stop and clutch tool to tighten down. Be careful on the clutch depending on your piston stop you can put a hole in the top of the piston with it.

    Thanks and have a great day.

    Answer

     

    • Greg P.

      Moe

      Thanks for the question. The specs you are needing are as follows:

      flywheel nut 35 nm

      crankcase 8 nm

      cyl 10 nm

      Clutch says use piston stop and clutch tool to tighten down. Be careful on the clutch depending on your piston stop you can put a hole in the top of the piston with it.

      Thanks and have a great day.

      • Be the first to rate this

        |