Husqvarna: Ask & Answerpublic

Walk Behind Lawn Mowers

 
This is a public Forum  public

Service & Maintenance Question

    Clifford Seals
    My husqvarna model hu800hw drive needs a part that the...
    Service & Maintenance Question posted September 11, 2016 by Clifford Seals 
    45 Views, 4 Comments
    Question:
    My husqvarna model hu800hw drive needs a part that the drive sprocket sits on. It has ball bearing that have fallen out. Its a 22 hi wheel assemble. What part do I need and How do I install this?

    • Be the first to rate this

      |

    • Bookmark and Share

    Answer

     

    • Eugene Rounds

      Sounds like writing about the wheel adjuster. Is it the left or right?

      Here an image of the left one. Is what your looking at?

      • Be the first to rate this

        |

    • Clifford Seals

      That is exactly the part I need.  Thanks for your reply.

      • Be the first to rate this

        |

      • Eugene Rounds

        Then it is 532437865 for the LH unit.

        Can't answer how to remove and install as it has been a few years but I do know there is two nuts on the inside the rear baffle.

        • Be the first to rate this

          |

    • Clifford Seals

      Thanks for the tip. After banging on it for awhile, I saw the two bolts inside that I had to remove.

      • Be the first to rate this

        |