Just brought Husq YT46LS 4 hours ago and ran over some thick leaves and now blades do not engage. I cleaned everything out but they still do not engage. What do I need to do?
First make sure the electric PTO still engages as a limb could have pulled the electrical plug from it then check that v-belt is routed properly. These are the first things I would check and then go from there.
Answer
First make sure the electric PTO still engages as a limb could have pulled the electrical plug from it then check that v-belt is routed properly. These are the first things I would check and then go from there.
Be the first to rate this
|