Husqvarna: Ask & Answerpublic

Snow Blowers

 
This is a public Forum  public

General Product Question

    Robert Padich
    I just purchased a model 1830VH snow blower. After checking...Answeredescalated
    General Product Question posted January 8, 2012 by Robert Padich, last edited February 10, 2012 
    368 Views, 2 Comments
    Question:
    I just purchased a model 1830VH snow blower. After checking the oil and gassing it up, I was going to get familiar with the controls before we get a major snow. It started twice, running for about 10 seconds each time and now won't start. Any suggestions?
    Details:
     

    • Be the first to rate this

      |

    • Bookmark and Share

    Best Answer

    Greg P.

    Robert

    Thanks for the question.

    First check the fuel make sure valve is turned on, and there is enough fuel in it. Second make sure the oil level is correct if it is low it will not start. Third check the plug make sure it is not fuel fouled. If the 3 things I asked you to check are good then you will need to get to a dealer to have them check the unit out sir could have a safety switch issue or a coil issue.

    Thanks again and have a great day.

     

    Answer

     

    • Greg P.

      Robert

      Thanks for the question.

      First check the fuel make sure valve is turned on, and there is enough fuel in it. Second make sure the oil level is correct if it is low it will not start. Third check the plug make sure it is not fuel fouled. If the 3 things I asked you to check are good then you will need to get to a dealer to have them check the unit out sir could have a safety switch issue or a coil issue.

      Thanks again and have a great day.

       

      • Be the first to rate this

        |

    • Robert Padich

      Thanks Greg,

      It turned out I had not put in enough gasoline. The tank is bigger than I thought. Runs great.

      Bob

      • Be the first to rate this

        |