Husqvarna: Ask & Answerpublic

Snow Blowers

 
This is a public Forum  public

Service & Maintenance Question

    Mike Walsh
    Looking at purchasing a 924HV blower and was wondering how...Answeredescalated
    Service & Maintenance Question posted December 20, 2011 by Mike Walsh, last edited February 10, 2012 
    202 Views, 1 Comment
    Question:
    Looking at purchasing a 924HV blower and was wondering how you would lube the auger shaft? the manual does not show how this is accomplished, nor does it specify that it is part of normal maintenance. Other blowers in this range have a grease zerk to apply the grease to the auger and specify the steps in the manuals. thanks

    • Be the first to rate this

      |

    • Bookmark and Share

    Best Answer

    Greg P.

    Mike

    Thanks for the question it does not say anything about greasing the shaft. If it was me after each use I would spray the exposed metal with wd40 to keep from rusting. other than that it is a sealed gear box and a simple system should not have any real issues with it.

    Thanks and have a great day.

    Answer

     

    • Greg P.

      Mike

      Thanks for the question it does not say anything about greasing the shaft. If it was me after each use I would spray the exposed metal with wd40 to keep from rusting. other than that it is a sealed gear box and a simple system should not have any real issues with it.

      Thanks and have a great day.

      • Be the first to rate this

        |