The Key information from the bar is the following: 68 DL = # of Drive links, 3/8 = Pitch of the chain, and .050 = gauge of bar groove or thickness of drive links. And the 7/32" = round file size for sharpening.
Many Manufacturers will have cross reference charts from Oregon to what ever brand you would like to buy, just remember the DL, Pitch, and gauge.
A Husqvarna Cross reference would be: Husqvarna H47-68.
Also <Oregonchain.com> has lots of great chain information, I hope this helps!
Answer
Mo,
Oregonchain.com recommends the following chain:
The Key information from the bar is the following: 68 DL = # of Drive links, 3/8 = Pitch of the chain, and .050 = gauge of bar groove or thickness of drive links. And the 7/32" = round file size for sharpening.
Many Manufacturers will have cross reference charts from Oregon to what ever brand you would like to buy, just remember the DL, Pitch, and gauge.
A Husqvarna Cross reference would be: Husqvarna H47-68.
Also <Oregonchain.com> has lots of great chain information, I hope this helps!
Be the first to rate this
|