Parts Question
Hit a stump and bent the blade on my HU700F Husqvarna walk...escalated
Parts Question posted July 28, 2013 by Bradley Wilson
977 Views, 3 Comments
Question:
Hit a stump and bent the blade on my HU700F Husqvarna walk behind mower. Owners manual says replacement blade part number is 532406713. That specific blade doesn't seem to be available at my local Lowe's store where I purchased the mower. They have others just not this exact part. Will other blades fit this mower or must it be the 532406713?
Answer
As long as the blade is the same size you should be able to find a univeral blade which if not available at Lowe's should be available at Home Depot. Otherwise you can contact a dealer who services Husqvarna Power Equipment in your area to see if they have the blade or could order it for you. Have you checked the Husqvarna website for the blade?
Be the first to rate this
|
The part is also available for $11.11 at the following website.
http:www.mowerpartpros.com
Be the first to rate this
|
The other thing that you should check is the shaft where the blade attaches. It is very common that the shaft gets bent when you hit something that bends the blade. If the mower shaft was bent, your mower will probably shake while running and it can be unsafe to run the mower. The vibrations can cause the bolt on the blade to loosen, which can be very dangerous.
I would recommend having someone check the shaft on your mower to make sure it isn't bent.
Be the first to rate this
|