This is a public Forum  public

Service & Maintenance Question

    kevin Pokorny
    I have had a 325C trimmer for about 9 years. Today I tried...Answeredescalated
    Service & Maintenance Question posted July 24, 2011 by kevin Pokorny, last edited February 10, 2012 
    197 Views, 1 Comment
    Question:
    I have had a 325C trimmer for about 9 years. Today I tried to start it and the engine fell off the shaft. I removed the control handle and couldn't find anything broken. I reassembled and the engine wouldn't stay on. Is there any tricks to putting the engine back on? Is this a common problem?
    • Be the first to rate this

      |

    • Bookmark and Share

    Best Answer

    Scott W.

    Thank you for contacting the AnswerARMY

    This is not a common failure at all, there are four screws involved in holding the clutch housing to the drive tube. It sounds like you need to have your authorized Husqvarna dealer take a look at the machine to see if you have any screws missing.

    You can find your local authorized service center by visiting http://www.husqvarna.com.

    Answer

     

    • Scott W.

      Thank you for contacting the AnswerARMY

      This is not a common failure at all, there are four screws involved in holding the clutch housing to the drive tube. It sounds like you need to have your authorized Husqvarna dealer take a look at the machine to see if you have any screws missing.

      You can find your local authorized service center by visiting http://www.husqvarna.com.

      • Be the first to rate this

        |