Do not have spark at the plug,tried two new ones,still no spark. Was running before I tried this but very roughly for about 2min. Then died now no spark.
First you make sure there is an electrical ground between the ignition coil metal core and the cylinder. This done using an ohms meter. Once this is confirmed removed the wire connector from the kill terminal. If it still does not produce a spark then the ignition coil is bad. If there is a spark then there is short in the kill (Stop) wiring or switch.
Answer
First you make sure there is an electrical ground between the ignition coil metal core and the cylinder. This done using an ohms meter. Once this is confirmed removed the wire connector from the kill terminal. If it still does not produce a spark then the ignition coil is bad. If there is a spark then there is short in the kill (Stop) wiring or switch.
Be the first to rate this
|