Service & Maintenance Question
I have a model 326L X series trimmer 2001-03 year. Needing...Answeredescalated
Service & Maintenance Question posted April 14, 2012 by Leonard Elledge, last edited May 10, 2012
1034 Views, 1 Comment
Question:
I have a model 326L X series trimmer 2001-03 year. Needing to put fuel lines on primer bulb and carb. Which is the inlet port and outlet port on carb. It has a Zama carb with port on bottom has sharp bend in it. Other port is on top slight bend near adjustment screws. Which port is which. Bought used and all the fuel lines were missing. Any help would be greatly appreciated.
Best Answer
Answer
Thank you for contacting Husqvarna's Answer Army.
Correct fuel hose plumbing is as below:
From the nipple next to the adjusting needles, there should be a short hose going to the short nipple on the purge bulb.
The dump line for fuel recirculation goes from the long nipple on the purge bulb direct back to the fuel tank.
The fuel supply hose (with filter, inside tank) goes to the fuel inlet nipple on the back side of the carburetor.
We trust the above is helpful.
Thank you for contacting Husqvarna's Answer Army.
Correct fuel hose plumbing is as below:
From the nipple next to the adjusting needles, there should be a short hose going to the short nipple on the purge bulb.
The dump line for fuel recirculation goes from the long nipple on the purge bulb direct back to the fuel tank.
The fuel supply hose (with filter, inside tank) goes to the fuel inlet nipple on the back side of the carburetor.
We trust the above is helpful.