Service & Maintenance Question
20 amp fuses keep blowing on my Husqvarna rz4623. Sometimes...
Service & Maintenance Question posted October 12, 2015 by Michael Von Wheeler
1841 Views, 1 Comment
Question:
20 amp fuses keep blowing on my Husqvarna rz4623. Sometimes it'll blow 10 in a row and other times it won't blow til its ran for a little while and if I cut it off then back on it'll blow. Just got a new battery for it so I'm not sure if its just got a strong charge and the wires the fuse connect to are over heating and those wires need replacing or if just changing out the ignition switch will fix the problem. If anybody has gotten suggestions. I'd love to hear them.
Answer
If you know how the terminal from connector at the ignition switch remove both the Purple and Yellow/Red wire from terminals A1 and L. The engine will only crank but if the fuse blows then replace the ignition switch.
If fuse does not blow reconnect the Purple wire to the A1 terminal and test. This line is for the electric PTO Clutch and the hour meter(s). The Yellow/ Red wire is for your accessory outlets.
Be the first to rate this
|