Service & Maintenance Question
I have a Husqvarna Zero turn mower model Z4822/968999301. I...Answeredescalated
Service & Maintenance Question posted August 18, 2011 by John Robinson, last edited February 10, 2012
470 Views, 2 Comments
Question:
I have a Husqvarna Zero turn mower model Z4822/968999301. I have about 220 hours on the mower. When I go to engage the pto for the mower deck the motor stalls out. The fuse is okay and as far as I can determine there is no loose wiring. Any help here would be appreciated.
Best Answer
Answer
Thank you for contacting the AnswerARMY.
It is upsetting that you have experienced this failure.
My first suggestion is to make sure no one has attempted to disconnect any of the safety switches and if they are to reconnect and then try it again.
This can also happen if the mower is having to be jump started not enough power in the battery. It could be something like a fouled plug on one cylinder and of course there could be something caught in the mower deck.
After you verify the safety switches are connected I suggest you take this to your local authorized Husqvarna service center for repairs.
- posted November 22, 2016 by Brenda Moreau
- Permalink
The safety switch wasn't being pushed in when I sat on seat. Push by hand an engage PTO. IF engine stays running, your welcome.
Thank you for contacting the AnswerARMY.
It is upsetting that you have experienced this failure.
My first suggestion is to make sure no one has attempted to disconnect any of the safety switches and if they are to reconnect and then try it again.
This can also happen if the mower is having to be jump started not enough power in the battery. It could be something like a fouled plug on one cylinder and of course there could be something caught in the mower deck.
After you verify the safety switches are connected I suggest you take this to your local authorized Husqvarna service center for repairs.