have a 128 ld string trimmer. Purchased a replacement clutch and clutch tool. how does the clutch drum remove? is it pressed on? special tool needed? mike rawls
Down the hole where the cable goes is a torx screw that be loosen until you can slide off the drum. Should be a standard RH threaded screw. Don't remember off the top my head if it is T10, T15 or T20 screw. I haven't removed one this year yet.
When comes to the removal of the clutch there will indicator mark indicating if LH or RH threaded. Also you need a piston stop to loosen and tighten it.
Answer
Down the hole where the cable goes is a torx screw that be loosen until you can slide off the drum. Should be a standard RH threaded screw. Don't remember off the top my head if it is T10, T15 or T20 screw. I haven't removed one this year yet.
When comes to the removal of the clutch there will indicator mark indicating if LH or RH threaded. Also you need a piston stop to loosen and tighten it.
Be the first to rate this
|