Service & Maintenance Question
I have a Husqvarna LTH130-model # 95414005J,42" deck...
Service & Maintenance Question posted July 10, 2017 by Mike Adkins
38 Views, 2 Comments
Question:
I have a Husqvarna LTH130-model # 95414005J,42" deck Can you send me a...
Service & Maintenance Question posted 06:41 PM EDT by Mike Adkins
Question: I have a Husqvarna LTH130-model # 95414005J,42" deck
Can you send me a diagram on how to mount the pulley and bracket that slides is a groove, I believe its called the tensioner pulley and has a big spring hooked above the pulley to a bracket at the back side of mower deck. I removed and cannot remember if the bolt for the pulley comes up from the bottom of the slot or if the bolt head just sits on top of the slot. I have looked all over for something and cannot find anything
Thanks,
Mike
Eugene, Thank you for the response, sorry I cannot tell if the bolt on the slide bracket with the spring, does the head of the bolt sit on top or does it come up from the bottom, are there any pictures or better diagrams Thanks Mike
Service & Maintenance Question posted 06:41 PM EDT by Mike Adkins
Question: I have a Husqvarna LTH130-model # 95414005J,42" deck
Can you send me a diagram on how to mount the pulley and bracket that slides is a groove, I believe its called the tensioner pulley and has a big spring hooked above the pulley to a bracket at the back side of mower deck. I removed and cannot remember if the bolt for the pulley comes up from the bottom of the slot or if the bolt head just sits on top of the slot. I have looked all over for something and cannot find anything
Thanks,
Mike
Eugene, Thank you for the response, sorry I cannot tell if the bolt on the slide bracket with the spring, does the head of the bolt sit on top or does it come up from the bottom, are there any pictures or better diagrams Thanks Mike
Answer
It goes in the moving bracket only not the in the slot.That there is an offset to the bracket. Maybe this image will give a better view; had to get to shop to find one. This shows with the carriage bolt inserted with the bracket only; otherwise, the swing will not move. Note: The parts is upside down in image.
Be the first to rate this
|
Thanks Eugene
Be the first to rate this
|