What would cause fouling as in the pic for a Husqvarna hand blower?
It builds wile running and eventually causes a short on the plug such that it can not be started.
The material is rather firm when clearing it.
It is carbon fouling. Flaking off the piston and or cylinder. Usually caused by either the bad fuel oil or running too rich. Either it is imcomplete fuel mix burn.
Answer
It is carbon fouling. Flaking off the piston and or cylinder. Usually caused by either the bad fuel oil or running too rich. Either it is imcomplete fuel mix burn.
BTW what blower and what plug being used?
Be the first to rate this
|
Husqvarna 125B
Plug:Champion 852ECO
Have carburetor adjustment tool and adjusted to H=1 and L=1 1/2
Be the first to rate this
|