I have an Husqvarna Rz 5424 Zero turn that recently had the idler pulley on the drive side self destruct. I replaced it, and am now having an issue with the drive. It seems like it is low on hydraulic fluid now. With the blades going , as I try to accelerate forward, if I push the handles too far it just stops. I dont want to mow at 1 mph Additionally, I cant find a diagram that tells me how to route the drive belt. There is a tensioner spring that controls the idler pully (I think) as it was disconnected . I reconnected it the way that put tension on the belt, but its not the side I found it laying on. There isnt a diagram in the parts breakdown that shows this. Any help woukd be greatly appreciated.
Thank you Eugene. I did install it backwards. I went from the RH pully to the Idler and had the tension spring pulling from the other side. Go figure.....Hahaha!
Answer
Need the make and model number.
Be the first to rate this
|
I have an Husqvarna Rz 5424 Zero turn that recently had the idler pulley on the drive side self destruct. I replaced it, and am now having an issue with the drive. It seems like it is low on hydraulic fluid now. With the blades going , as I try to accelerate forward, if I push the handles too far it just stops. I dont want to mow at 1 mph Additionally, I cant find a diagram that tells me how to route the drive belt. There is a tensioner spring that controls the idler pully (I think) as it was disconnected . I reconnected it the way that put tension on the belt, but its not the side I found it laying on. There isnt a diagram in the parts breakdown that shows this. Any help woukd be greatly appreciated.
Be the first to rate this
|
Spring right side frame and idler pulley
Be the first to rate this
|
Thank you Eugene. I did install it backwards. I went from the RH pully to the Idler and had the tension spring pulling from the other side. Go figure.....Hahaha!
Be the first to rate this
|