Service & Maintenance Question
My Husqvarna PZ60 is nearing 3 years old. This year, it has...
Service & Maintenance Question posted July 1, 2017 by Daniel Girt
131 Views, 3 Comments
Question:
My Husqvarna PZ60 is nearing 3 years old. This year, it has decided not to crank when it has been used for an hour or more. After overnight cool down everything is fine. I am in the process of trying to map the wiring with 2 copies of the wiring diagram, one Key off and one with key in run. Unfortunately the one in the owners manual does not provide values for each circuit in either position. I'm not a geniuse when it comes to wiring but I want to figure out whats hot and what's not when it fails to start. WHAT IS A SEAT TIMER and WHAT IS ITS purpose?
Answer
I am having the same problem with my mower. Same model, a 2014 unit. Shut it down to move a garden hose while mowing, and nothing when going to re-start it. All I can hear is the fuel shut off solenoid activating. No power going to starter. In Process of figuring out how to bypass all the freaking safety switches to test it out.
Be the first to rate this
|
Bruce, Go to your dealer and tell them you want the "kit" for the PTO. It will come with a new PTO switch and a small harness modification which has a diode? installed which prevents electrical feedback to the PTO switch. It should be free. It wasn't until I paid my dealer to install a new switch, then my friend who has an identical mower started having the same problem. He took his in too and 50.00 in labor and the new kit later he's off and running. I picked up my kit from the dealer about 2 months ago and I have not yet installed it but, I will have to very soon since it is starting to act this way again!
Be the first to rate this
|
Until you get the kit, make sure you don't shut it off until you get it to your parking spot!
Be the first to rate this
|