Service & Maintenance Question
I have a 125 B blower. It has worked fine for a year or so....Answeredescalated
Service & Maintenance Question posted October 2, 2011 by Craig McMAhan, last edited February 10, 2012
281 Views, 1 Comment
Question:
I have a 125 B blower. It has worked fine for a year or so. At the last use, however, it stalled and I have not been able to start it since. I have replaced the spark plug and checked to make sure that it is sparking. The fly wheel pulls easy. But, there is no hint of the engine turning over. It is almost as if the "kill switch" is stuck in the on position. Any ideas?
Best Answer
Answer
Thank you for contacting the AnswerARMY.
It is upsetting that you have had this failure.
No, from this description there really is no way to begin, we would need compression reading and pressure and vacuum testing done. if these were good would need to pull the flywheel to check the key.
This is somethign your dealer will need to look at please contact your local authorized Husqvanra service center, take the blower in and have them inspect and evaluate the blower.
Thank you for contacting the AnswerARMY.
It is upsetting that you have had this failure.
No, from this description there really is no way to begin, we would need compression reading and pressure and vacuum testing done. if these were good would need to pull the flywheel to check the key.
This is somethign your dealer will need to look at please contact your local authorized Husqvanra service center, take the blower in and have them inspect and evaluate the blower.