Service & Maintenance Question
130BT the throttle cable wont stay on the carb. It keeps...Answeredescalated
Service & Maintenance Question posted October 17, 2011 by Rodney Mehl, last edited February 10, 2012
169 Views, 1 Comment
Question:
130BT the throttle cable wont stay on the carb. It keeps coming off.
Best Answer
Answer
Thank you for contacting the AnswerARMY.
It is upsetting that you have had this failure.
This has been heard from time to time and most frequently is is discovered that the carburetor is "sticking".
I would ask that you have your local authorized Husqvarna service center inspect the carburetor ( this might not be warranty if the unit has age on it, your dealer will be able to determine if warrantable ). If the carburetor is found to be in good repair, a thorough cleaning of the barrel should correct the sticking.
I do have another possible solution part number 516 40 58 01 this was a part we developed to combat this issue, when carbs have old fuel or grit in them sticking the barrel.
Thank you for contacting the AnswerARMY.
It is upsetting that you have had this failure.
This has been heard from time to time and most frequently is is discovered that the carburetor is "sticking".
I would ask that you have your local authorized Husqvarna service center inspect the carburetor ( this might not be warranty if the unit has age on it, your dealer will be able to determine if warrantable ). If the carburetor is found to be in good repair, a thorough cleaning of the barrel should correct the sticking.
I do have another possible solution part number 516 40 58 01 this was a part we developed to combat this issue, when carbs have old fuel or grit in them sticking the barrel.