Husqvarna: Ask & Answerpublic

Chainsaws

 
This is a public Forum  public

Service & Maintenance Question

    ken bancroft
    How do you remove the clutch assembly to replace the drive...Answeredescalated
    Service & Maintenance Question posted November 4, 2011 by ken bancroft, last edited February 10, 2012 
    244 Views, 1 Comment
    Question:
    How do you remove the clutch assembly to replace the drive gear on a 353xp chainsaw

    • Be the first to rate this

      |

    • Bookmark and Share

    Best Answer

    Greg P.

    Hi Ken,

    Thank you for contacting Husqvarna. You will need special tools. Part # 502 54 16-03 Clutch puller and piston stop 502 54 15-01. Husqvarna does not sell any parts direct. You can find your local Husqvarna dealers for sales, service, parts and manuals using the link. /images/us/homeowner/home/ . You must contact your local Husqvarna Service center for any and all parts and service as well as pricing. Any Husqvarna dealer should be able to order parts as needed.

    (1) Remove the cylinder cover. Disengage the chain brake by pushing the kickback guard backwards. Undo the guide bar bolts and remove the clutch cover, chain and guide bar.

    (2) Disconnect the HT lead. Remove the spark plug and fit piston stop 502 54 15-01 in its place.

    (3) Unbolt the clutch using tool 502 54 16-01 and a suitable socket or combination spanner. Turn the nut clockwise to remove it.

    When assembling torque clutch to 20 Nm. Hope thie helps.

     

    Answer

     

    • Greg P.

      Hi Ken,

      Thank you for contacting Husqvarna. You will need special tools. Part # 502 54 16-03 Clutch puller and piston stop 502 54 15-01. Husqvarna does not sell any parts direct. You can find your local Husqvarna dealers for sales, service, parts and manuals using the link. /images/us/homeowner/home/ . You must contact your local Husqvarna Service center for any and all parts and service as well as pricing. Any Husqvarna dealer should be able to order parts as needed.

      (1) Remove the cylinder cover. Disengage the chain brake by pushing the kickback guard backwards. Undo the guide bar bolts and remove the clutch cover, chain and guide bar.

      (2) Disconnect the HT lead. Remove the spark plug and fit piston stop 502 54 15-01 in its place.

      (3) Unbolt the clutch using tool 502 54 16-01 and a suitable socket or combination spanner. Turn the nut clockwise to remove it.

      When assembling torque clutch to 20 Nm. Hope thie helps.

       

      • Be the first to rate this

        |