Husqvarna: Ask & Answerpublic

Chainsaws

 
This is a public Forum  public

Warranty Question

    Andrew Kozlowski
    We purchased Model T435 Trim/Arborist Chainsaw few months...Answeredescalated
    Warranty Question posted March 29, 2012 by Andrew Kozlowski, last edited April 16, 2012 
    972 Views, 1 Comment
    Question:
    We purchased Model T435 Trim/Arborist Chainsaw few months ago. Ran approximately 22-24 tankfuls of fuel usage so far. We are experiencing chain oiling problems. The saw does not use any bar oil for almost an entire tankful of fuel. The chain is overheating. We took the bar and chain off yesterday and ran it at full RPMS to watch for oil.We cheched for obstructed oiling passage but still not oiling.

    • Be the first to rate this

      |

    • Bookmark and Share

    Best Answer

    Greg P.

    Hi Andrew

    Thanks for contacting the Answer Army to post your questions.

    The most common problem is the oil ports are clogged or the oil pick up is bad. You should go through 1 tank of oil to 1 tank of gas. I would recommend taking the unit to a service center to have a professional look at the pick up.

    Thanks again from the Husqvarna Technical Services Team.

     

    Answer

     

    • Greg P.

      Hi Andrew

      Thanks for contacting the Answer Army to post your questions.

      The most common problem is the oil ports are clogged or the oil pick up is bad. You should go through 1 tank of oil to 1 tank of gas. I would recommend taking the unit to a service center to have a professional look at the pick up.

      Thanks again from the Husqvarna Technical Services Team.

       

      • Be the first to rate this

        |