Service & Maintenance Question
I just purchased a HU800AWD. The electrical connection from...escalated
Service & Maintenance Question posted May 1, 2013 by Joe Manifold
146 Views, 3 Comments
Question:
I just purchased a HU800AWD. The electrical connection from the operator presence control bar (the end near the spark plug) has become disconnected. I can't see where the connector is supposed to connect to, and I can't see it on any of the diagrams in the owners manual.
Can you send me a picture or diagram showing the location where operator presence control bar terminates?
Thank you for your help.
Joe Manifold
Can you send me a picture or diagram showing the location where operator presence control bar terminates?
Thank you for your help.
Joe Manifold
Photo:
Answer
That may be the kill wire that connects directly to the ignition module. You should be able to remove the engine cover and recoil starter with a 10mm socket by removing the 3 nuts holding them together. It may be necessary to remove the shroud as well. That should be all you need to do to be able to reconnect the wire.
Be the first to rate this
|
Quick answer.
Right on point.
Very helpful.
Thank you very much.
Joe Manifold
Be the first to rate this
|
Glad to help.
Be the first to rate this
|