could not hardly believe my eyes, have several 480's, to remove one of my flywheels I would loosen but not remove the flywheel nut, hold the saw off the bench with pliers on the fins (two pairs) & have someone tap the flywheel, the seals don't really have pullers, if you break the crankcase in half they will punch out, or you can try a self tapping screw in the outside and pull on that... good luck!
Answer
could not hardly believe my eyes, have several 480's, to remove one of my flywheels I would loosen but not remove the flywheel nut, hold the saw off the bench with pliers on the fins (two pairs) & have someone tap the flywheel, the seals don't really have pullers, if you break the crankcase in half they will punch out, or you can try a self tapping screw in the outside and pull on that... good luck!
Be the first to rate this
|