Service & Maintenance Question
i have a 55 rancher, aprox year is 2003. i have taken off...escalated
Service & Maintenance Question posted September 19, 2012 by jack faught, last edited September 19, 2012
80 Views, 2 Comments
Question:
i have a 55 rancher, aprox year is 2003. i have taken off the carb to clean it, and now i cant remember how to hook up the throttle. it seems like the air filter is in the way, or i have misplaced a part. Please help, i can t find a daigram anywhere.
Average Rating:
100% (+1/-0)|
-
Answer
Jack, See If the attached U-tube Video link helps: http://www.youtube.com/watch?v=PuU3VJVMI8A&NR=1&feature=fvwp
I watched it, and it looks like it should work for you!
Be the first to rate this
|
Why is so challenging to find post on one model chainsaw? that linkage has three parts and doesn't go into a captured hole on the plate on the carb controlling the flutter valve it goes into the long notch and under the air filter into a capturing/aligning rectangular plastic bushing thing that slips down into position with a cover not unlike a bar cover that the throttle itself then sends forwards and back. The fuel line, the choke linkage, the fuel linkage and the carb gasket have to go on at the same time as aligning the air filter backer [a juggling act]. My saw was vandalized and I'm trying to find the factory presets for the fuel jets so I can fix that next. My throttle plate was bent, the flutter valve was turned and the jets put out of adjustment in the extreme. It was either the never ending gas lighting or the revenge of a ***.
Be the first to rate this
|