Parts Question
What replacement chain is recommended for my 18"...
Parts Question posted November 3, 2015 by Gary Jorgensen
44 Views, 4 Comments
Question:
What replacement chain is recommended for my 18" Husqvarna 240e chainsaw?
The chain that came on it has "91" and "PV" stamped on it. It has 62 drive links.
Thanks,
Gary Jorgensen
The chain that came on it has "91" and "PV" stamped on it. It has 62 drive links.
Thanks,
Gary Jorgensen
Answer
Look at the tail of the bar ( The end closest the engine) there should be a set numbers there. Please post so we know gauge bar you have.
Right now it is a 3/8 LP chain with 62 drive links but there is 0.050 gauge and a .043 gauge available depending the bar use; although, the .043 gauge isn't use too much on these saws.
Be the first to rate this
|
Eugene,
It is a .050 gauge.
Thanks,
Gary J.
Be the first to rate this
|
My manual says it is a .050 gauge, but they do not suggest a chain replacement number. Can you help?
Thanks,
Gary J
Be the first to rate this
|
Gary, Here is three Oregon chains that will fit the specs given. The green chains are safety chains.
According to your drive count the original bar has been replace as Husqvarna lists the 18 bar as using 68 Drive link chain. The chain that has the 68 drive links is their part number 501846568 (H80 - 18" (.050)).
Referenced Husqvarna info below:
http://www.powermowersales.com/pages/CustomCatalog/Product/1353401
Be the first to rate this
|