Service & Maintenance Question
Can anyone tell me how to remove the trimmer head on the...escalated
Service & Maintenance Question posted July 30, 2013 by Stephen Scullin
1945 Views, 2 Comments
Question:
Can anyone tell me how to remove the trimmer head on the 128CD model? I cannot figure out how to lock the spin action to remove the head.
I recently bought the Husqvarna 128CD string trimmer, and would like to remove and replace the trimmer head. This model is different from all other sting trimmers I have previously owned as it does not have a nut above the trimmer head where you can use a wrench to lock the spin action to twist the head off. See attached pictures.
Thanks for your help.
I recently bought the Husqvarna 128CD string trimmer, and would like to remove and replace the trimmer head. This model is different from all other sting trimmers I have previously owned as it does not have a nut above the trimmer head where you can use a wrench to lock the spin action to twist the head off. See attached pictures.
Thanks for your help.
Answer
I need some help with this as well. Do I just go out and purchase a different Kit Driveshaft Lower Cd or is there something I'm missing?
Be the first to rate this
|
2 years later :)
there's a small hole on the shaft-side of the black head (mine was filled in w/ grass & debris). I stick a nail in there and it stops the turn mechanism that allows you to unscrew the head. It is reverse-threaded so you turn it the "wrong" way to loosen it.
Be the first to rate this
|