General Product Question
Is there any way to convert a 450 Rancher from...
General Product Question posted May 2, 2016 by jamie cason
195 Views, 4 Comments
Question:
Is there any way to convert a 450 Rancher from .325'' to 3/8'' pitch? How would i go about doing this or finding information on how to do it?
Answer
If it is a rim drive system it should be just a matter changing the sprocket rim, bar, and chain out.
Be the first to rate this
|
Do you know which sprocket I should use?
Be the first to rate this
|
Was hoping you had a rim drive system but it can be done; although it is a lot more expensive.
As far as I know it a lot hardier go the spur sprocket route. It would require changing over to a adjustable oil pump, changing out the oil pump pinion to the one that the 455 has, then you could use the spur sprocket from the 455.
Spur Sprocket 537291604
Oil Drive Pinion 537252601
Adjustable Oil Pump 544180104
I did the oil pump conversion on my 450 because I wanted the adjustable pump but stuck with .325 setup otherwise.
This will require some minor alteration to the oil pump cover plate.
Be the first to rate this
|
Thank you for all the information!
Be the first to rate this
|