This is a public Forum  public

General Product Question

    Joe DeCarlo
    Cutting height adjustment for a YTH22V42 tractor: What is...Answeredescalated
    General Product Question posted April 10, 2012 by Joe DeCarlo, last edited May 7, 2012 
    867 Views, 3 Comments
    Question:
    Cutting height adjustment for a YTH22V42 tractor: What is the ratio of the cutting height lever adjustment number to grass height? For example is 6=4", 5=3.5" etc.

    Thanks in Advance,
    Joe
    • Be the first to rate this

      |

    • Bookmark and Share

    Best Answer

    Greg P.

     Joe,

    The mower deck height adjustment is one in to four inches.

    Top notch would be the 4 inch height; bottm notch would be the one inch height.

    Intermediate 4 notches would be proportionable: each notch would amount to a 3/5 (or just under 5/8) inch change in height.

    Approximate heights would be: 2nd notch from bottom 1 5/8 inch, 3rd notch 2 1/4, 4th notch 2 3/4, 5th notch 3 3/8.

    Answer

     

    • Greg P.

       Joe,

      The mower deck height adjustment is one in to four inches.

      Top notch would be the 4 inch height; bottm notch would be the one inch height.

      Intermediate 4 notches would be proportionable: each notch would amount to a 3/5 (or just under 5/8) inch change in height.

      Approximate heights would be: 2nd notch from bottom 1 5/8 inch, 3rd notch 2 1/4, 4th notch 2 3/4, 5th notch 3 3/8.

      • Be the first to rate this

        |

    • robert powers

      I have the same prob. can only get 2.5 max cut. my tires all measure 2 inch's smaller than they are suppose to be. trying to get husqy to fix it

      • Be the first to rate this

        |

    • Roon Baker

      On my "Concrete" garage floor, the height at the #6 level is only 3".  When you get on the grass, it goes down to 2-1/2 " which is 1" shorter than what I want to cut it.  Any advise on height adjustment?  If not, I'm taking it back for a refund.

      • Be the first to rate this

        |