E-mail from engine mfg states that at the factory sometimes the valve cover is set too high and interferes with the spark plug removal. Was suggested to loosen the 4 screws holding the valve cover and slide down a bit. That maybe easier said then done. I also purchased a thin walled spark plug wrench. I'll try that first. Will post what worked.
I tried to move the valve cover as was suggested, that didn't work. I got the wrench today and that worked it is an Arnold Extended Spark Plug Wrench Part # 490-850-0018.
Answer
E-mail from engine mfg states that at the factory sometimes the valve cover is set too high and interferes with the spark plug removal. Was suggested to loosen the 4 screws holding the valve cover and slide down a bit. That maybe easier said then done. I also purchased a thin walled spark plug wrench. I'll try that first. Will post what worked.
Average Rating: 100% (+1/-0)
|
Unable to get to the upper right top screw, Will have to get creative to loosen that screw. Waiting on the spark plug wrench.
Be the first to rate this
|
I tried to move the valve cover as was suggested, that didn't work. I got the wrench today and that worked it is an Arnold Extended Spark Plug Wrench Part # 490-850-0018.
New plug is in.
Be the first to rate this
|