Posts
Service & Maintenance Question posted September 8, 2018 by Robin JonesI have a poulan pro PP4218AVX is there a conversion kit for the chain Tightener to a traditional two nut system.- Service & Maintenance Question posted July 28, 2018 by Brad CobbPoulan Pro chainsaw model Identification no stickers
I have an older model Poulan Pro chainsaw which I've been doing some maintenance on. I would like to replace all the missing stickers that have worn or rubbed off, but I don't know what the model number is to know what stickers to purchase, since all the stickers having that information are long gone. Bit of a catch-22.
Is it possible to look at the outside of a Poulan Pro chainsaw and determine what model it is? I'm hoping for some guidance for Ways and Means determining model and different places to search on the chainsaw for obtaining serial number, or anything else that might be helpful in determining the model of my chainsaw.
Once I know the model number I can find the manual for the chainsaw and hopefully be able to order any necessary parts, such as the missing stickers.
Would a photo of my chainsaw help in identifying the model number? If I could find a bunch of pictures of different models, I might be able to compare them with my saw and determine the model?
Thanks in advance for all your help! :-) - Service & Maintenance Question posted July 28, 2018 by Brad CobbI have an older model Poulan Pro chainsawwhich I've been doing some maintenance on. I would like to replace all the missing stickers that have worn or rubbed off, but I don't know what the model number is to know what stickers to purchase, since all the stickers having that information are long gone. Bit of a catch-22.
Is it possible to look at the outside of a Poulan Pro chainsaw and determine what model it is? I'm hoping for some guidance for Ways and Means determining model and different places to search on the chainsaw for obtaining serial number, or anything else that might be helpful in determining the model of my chainsaw.
Once I know the model number I can find the manual for the chainsaw and hopefully be able to order any necessary parts, such as the missing stickers.
Would a photo of my chainsaw help in identifying the model number? If I could find a bunch of pictures of different models, I might be able to compare them with my saw and determine the model?
Thanks in advance for all your help! :-) - Service & Maintenance Question posted April 17, 2018 by trevor alveswith the sparkplug out fuel just pours out when i pull the cord
- Service & Maintenance Question posted October 22, 2017 by GEorge ClarkMy poulan pro chainsaw was left outside over night and a rainstorm came through, will this damage the saw, have not tried to start it yet wanted to ask first.
- Service & Maintenance Question posted August 25, 2017 by Joan HawkinsHow do I remove the cover from my Poulan Pro PPB40PS 40V Lithium Ion Battery operated 8" pole saw to get to the bar and chain?
I have read and searched everywhere in the book that comes with the saw as well as on the internet with no results found.
In order to adjust the chain tension and clean it, I need to be able to remove the cover. The only way I see to remove it is by removing all the screws. I am hoping there is an easier and quicker way to accomplish this task as it seems it needs to be done quite often for cleaning, per instruction manual.
Can anyone please help me with this issue?
Thanks in advance for your help!!! - Service & Maintenance Question last edited July 10, 2017 by Richard RolosonI have a PP4218AVX that was running. I was using the chainsaw to cut a big branch that had fallen in my back yard, one of the fuel lines had rotted through and was leaking so I replaced it, I pulled out the carburetor because the line went into the fuel tank. When I replaced the fuel line and put the carburetor back in I cant get the chainsaw started. I am not sure if the fuel lines are hooked up incorrectly or the carburetor needs rebuilt or what. I have a spark. Any help is appreciated.
- Service & Maintenance Question posted April 25, 2017 by Ben RichardsonI can not move the chain brake lever up or down and it will not start. It is a Poulan PL3314. I used it once and was ok but now have this problem
- Service & Maintenance Question last edited February 10, 2012 by Steve SirotaMy 2003 Poulan Pro 260 18" 42cc won't idle. It will run wide open but when I let go of the throttle it shuts down. Need to use the chock lever to get it running. I recently replaced the spark plug, cleaned the air filter, tried 2 different cans of gas thinking it was a fuel issue. The fuel lines look good as does the priming bulb. It was running fine for a while that morning, then started acting up. Not sure what to do, any recomendations would be appreciate. Thanks
Recent Comments (3 of 4)
- November 25, 2016 by Olivia Fair: I'm looking at buying my first gas chainsaw. I'm interested in a...
- September 25, 2014 by robert smith: hello steve, allow me to introduce my-self. I am Robert, I...
- August 8, 2014 by eddie hall: +1 on Tru-Fuel. I resurrected a 25+ year old Poulan model 2000 this...
- Service & Maintenance Question posted October 15, 2016 by Michael HarwoodI purchased a Poulan Pro 18" chain saw. After completing a cut, the motor stalls as soon as I let off the gas. I make certain the motor is fully warmed up before attempting to make a cut. What's the problem ?
Filter by Date
| S | M | T | W | T | F | S |
|---|---|---|---|---|---|---|
| 1 | 2 | |||||
| 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| 17 | 18 | 19 | 20 | 21 | 22 | 23 |
| 24 | 25 | 26 | 27 | 28 | 29 | 30 |
| 31 |