Posts
Service & Maintenance Question posted January 31, 2013 by Thomas HendricksonI hane a new Poulan Pro 20" chainsaw PP5020AV The last 3 times I have used it after 20 minutes the sprocket on the end of the chain bar freezes up. I have to dismantle the chain/chain bar, free it up, lubricate it and then go back to work. Is the chain bar defective? If it is, since the unit is 5 weeks old how to I get a replacement under warrenty?- Service & Maintenance Question posted July 26, 2010 by LarryIs it ok to use STA-BIL fuel stabilizer with my chain saw?
Recent Comments (1 of 1)
- July 27, 2010 by Roger B.: Hi Larry, thanks for using Answer Army. Yes, it's ok to use STA-BIL in...
- my poulan pro chainsaw (model PP4218AVX)works great, no problems, EXCEPT the gas cap has to be forced out and back in. bought new cap, and after 2 or 3 uses the new cap has done the same thing. it has to be forced out and then back in. it's like it doesn't fit anymore at all. cooling down doesn't help. it just doesn't fit anymore. what's the deal? fellow at the local small engine shop has a few saws with the same problem, but no solution. can u help?
Recent Comments (1 of 1)
- August 4, 2010 by Roger B.: Hi Con, Thanks for contacting Answer Army. Unfortunately, if the new...
- Service & Maintenance Question posted September 8, 2018 by Robin JonesI have a poulan pro PP4218AVX is there a conversion kit for the chain Tightener to a traditional two nut system.
- Service & Maintenance Question posted July 28, 2018 by Brad CobbPoulan Pro chainsaw model Identification no stickers
I have an older model Poulan Pro chainsaw which I've been doing some maintenance on. I would like to replace all the missing stickers that have worn or rubbed off, but I don't know what the model number is to know what stickers to purchase, since all the stickers having that information are long gone. Bit of a catch-22.
Is it possible to look at the outside of a Poulan Pro chainsaw and determine what model it is? I'm hoping for some guidance for Ways and Means determining model and different places to search on the chainsaw for obtaining serial number, or anything else that might be helpful in determining the model of my chainsaw.
Once I know the model number I can find the manual for the chainsaw and hopefully be able to order any necessary parts, such as the missing stickers.
Would a photo of my chainsaw help in identifying the model number? If I could find a bunch of pictures of different models, I might be able to compare them with my saw and determine the model?
Thanks in advance for all your help! :-) - Service & Maintenance Question posted July 28, 2018 by Brad CobbI have an older model Poulan Pro chainsawwhich I've been doing some maintenance on. I would like to replace all the missing stickers that have worn or rubbed off, but I don't know what the model number is to know what stickers to purchase, since all the stickers having that information are long gone. Bit of a catch-22.
Is it possible to look at the outside of a Poulan Pro chainsaw and determine what model it is? I'm hoping for some guidance for Ways and Means determining model and different places to search on the chainsaw for obtaining serial number, or anything else that might be helpful in determining the model of my chainsaw.
Once I know the model number I can find the manual for the chainsaw and hopefully be able to order any necessary parts, such as the missing stickers.
Would a photo of my chainsaw help in identifying the model number? If I could find a bunch of pictures of different models, I might be able to compare them with my saw and determine the model?
Thanks in advance for all your help! :-) - Service & Maintenance Question posted April 17, 2018 by trevor alveswith the sparkplug out fuel just pours out when i pull the cord
- Service & Maintenance Question posted October 22, 2017 by GEorge ClarkMy poulan pro chainsaw was left outside over night and a rainstorm came through, will this damage the saw, have not tried to start it yet wanted to ask first.
- Service & Maintenance Question posted August 25, 2017 by Joan HawkinsHow do I remove the cover from my Poulan Pro PPB40PS 40V Lithium Ion Battery operated 8" pole saw to get to the bar and chain?
I have read and searched everywhere in the book that comes with the saw as well as on the internet with no results found.
In order to adjust the chain tension and clean it, I need to be able to remove the cover. The only way I see to remove it is by removing all the screws. I am hoping there is an easier and quicker way to accomplish this task as it seems it needs to be done quite often for cleaning, per instruction manual.
Can anyone please help me with this issue?
Thanks in advance for your help!!! - Service & Maintenance Question posted July 10, 2017 by Richard RolosonI have a PP4218AVX that was running. I was using the chainsaw to cut a big branch that had fallen in my back yard, one of the fuel lines had rotted through and was leaking so I replaced it, I pulled out the carburetor because the line went into the fuel tank. When I replaced the fuel line and put the carburetor back in I cant get the chainsaw started. I am not sure if the fuel lines are hooked up incorrectly or the carburetor needs rebuilt or what. I have a spark. Any help is appreciated.
Filter by Date
| S | M | T | W | T | F | S |
|---|---|---|---|---|---|---|
| 1 | 2 | |||||
| 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| 17 | 18 | 19 | 20 | 21 | 22 | 23 |
| 24 | 25 | 26 | 27 | 28 | 29 | 30 |
| 31 |