Meant to say 10500rpm not 11500. Thanks
We have found that the "half choke" feature to set the saw at a high idle is really needed on a warm 562XP, simply set the choke to full then click it down one notch, set the chainbrake and the secured saw a pull. Tap the trigger and you're at an idle, almost guaranteed one pull.
Extends to all Husqvarna saws but is almost a necessity on the 562 and 555.
should be a hole in the gearbox, you have to put the provided shaft (1/8" diameter?) into that hole to lock the head, reverse thread. This is to remove the head completely. to replace the string you have to push the clips in the head together to take the cover off to gain access to the string.