Hi Keith, When was the mower purchased? Why didn't the repair center contact us for warranty approval? We can't help the customer if we are not made aware of issues, as long as the machine is still within the warranty period and no signs of abuse/misuse are present we will cover the repair.
Hi Steve,
Do you run the trimmer at idle or lower speeds for extended periods? Also, if the machine is running rich buildup will occur around the exhaust.
Hi Anne,
We do not have a detailed workshop manual for this machine, The replacement of this cable is fairly straight forward. You will need to remove the front floorboard mounting screws so you are able to left that panel out of the way to access the area where the cable is attached to the pedal. the is held in place by a clevis and cotter pin. After removing the the cable will be free from the pedal shaft the cable housing is held into the mount by the plastic tabs that will need to be squeezed in to free it from the mounting bracket, You will then be able to remove the cable from the front of the machine. the rear of the cable is held in place the same way as the front. You will need to pay attention to the way the cable is routed or even run the new cable side by side with the old one to make sure it is routed properly.