Posts
Parts Question posted June 25, 2014 by GRASS FOOLQuestion:7021R I have a 2 year old H I have replace both rear drive wheels
and other bearings last summer. Now in June looks like the rear drive bushing are in failure mode again. These wheels are $25 plus. they need to be real bearing in them. Is there a replacement Wheel with bearings not BUSHINGS Oh Husq wheels are on back order. Any Info sure would help- Parts Question posted August 22, 2012 by Nitya SQuestion:Any one really looking into this issue. It has been "8 MONTHS" since I bought my lawn mower and i am still waiting for the parts. I should have listened to others who had similar issues with getting their parts. Husqvarna customer service is poor and nobody really has a clue to what is going on. You call the customer service number and they point you here and I am stuck. Is anyone there in your so called "Army" to provide atleast some sort of update on this issue??
---------
I purchased a new walk-behind mower (HU700L) on 04/24/2012 and was supposed to get my rear side discharge chute within 8 weeks. My product registration confirmation number is 120426-004588. I contacted the customer service in July and they said I should receive it within the next 5 days. I called them again today and they asked me to post a question online. Can someone tell me what is going on? I don't have a way to track my parts and it is very frustrating. It has been over 15 weeks and I need to know if at all I will get my mower part. - Parts Question posted August 30, 2016 by Joe BossQuestion:Are there adjustable steering Drag links for LGT 2554
- Parts Question posted September 1, 2018 by Pablo CasesQuestion:Are there any instructions available for installing transmission part number 589599201 on a 2013 HU725AWD?Details:
I have an Husqvarna HU725AWD - 96145001700 and need to replace the front transmission. However, the original front transmission part number 585305701 was superseded by 589599201 and the new one is different and longer shaft than the original part. It also doesn't have belt holder as the original.
- Parts Question posted June 11, 2017 by William BuchananQuestion:Are there any other grass catcher bags available for a Husqvarna 21" rear wheel drive walk behind mower besides the one that it comes with?Details:
I purchased a Husqvarna 21" walk behind mower on May 8 2017. When I use the bag I get covered in dirt because dirt blows out of the sides, back and top making it almost impossible to walk behind, breath and see. I had an older model Husqvarna walk behind and had no issues with the bag. It was more of a canvas type of material and the new bag is sort of a mesh material with larger holes.
- Parts Question posted June 14, 2018 by Richard NewQuestion:Bought a walk behind mower Model #HU700H, GCV160LA0$3BNH1. Lost rear grass catcher during move to new house. Where can I purchase a replacement rear grass catcher for this model? Mower works great, BTW.
Thanks - Parts Question posted May 24, 2016 by Phillip Houston SrQuestion:Bought LC121P walk behind mower, the bagger is the worst one that I have every used. It leaks so bad that after 5 min you need to take a bath. Have to wear a dust mask. Wife refuses to mow with this unit.
What do I need to get a proper bag? - Parts Question posted May 10, 2012 by Patrick BohlenQuestion:Can grass and wood cutting blades be integrated and used with the HU625HWT?
- Parts Question posted July 21, 2018 by Condor ThunderhawkQuestion:Can I change XT722FE to "normal" (non-propelled) front wheels?Details:
I have an XT722FE that I bought about 6 years ago. It has served me well, but in hindsight I should have bought the non-self-propelled version of the mower. I never use the feature, removed the belt long ago, and figure the drive mechanism for the front wheels is just dead weight that I don't need. (Yes, I realize it doesn't add much weight, but it's the principal of it! :) )
Can I buy front wheels (and the associated mounting brackets) for another model of Husqvarna mower to get rid of all the front drive stuff?
Thanks!
Condor
- Parts Question posted November 29, 2015 by Roman PuttkammerQuestion:Can I use a self-propelled deck 3 in 1 blade for the 7021P lawn mower? The blade is labelled "21'' Premium Self-Propelled Deck 3 in 1 Blade" and the model numbers listed are 7021CH1/M among others, but not 7021P. 7021P is a push lawn mower; the blade looks not much different from the blade originally in the mower.
What is the correct (mulching) blade to use for 7021P, and are there any online retailers that can be relied on to ship the right version?
Thank for helping!!
Filter by Type
Filter by Tag
- All
- 54
- 540
- 5521P
- 64
- 7021P
- 7021R
- 7021RB
- 7021RC
- 7021RH
- HU500F
- HU550FH
- HU625AWD
- HU625HWT
- HU675AWD
- HU675FE
- HU700AWD
- HU700F
- HU700H
- HU700L
- HU725AWD
- HU725AWD BBC
- HU725AWDE
- HU725AWDH
- HU725BBC
- HU800AWD
- HU800AWDH
- HU800H
- Husqvarna 64
- HVT52 HOVERING TRIMMER
- W436
- W448
- WGE3613
- WGE4815
- WGP3213
- WGP3613
- WGP4815
- WH3617
- WH4817
- WH5217
- WHF3617
- WHF4817
- WHF5223
- WHF6123
- XT721F
- XT722FE