This is a public Forum  public

Posts

  • LEO KOLARIK
    Is there a better 3rd party blade adapter that fits my...7
    Parts Question posted February 8, 2018 by LEO KOLARIK 
    Question:
    Is there a better 3rd party blade adapter that fits my HU800AWD
    Details:

    There appears to be a major problem with the star shearing or the key shearing on the Husqvarna 581851501 Blade Adapter .  My problem started after removing and sharpening blade prior to putting away for the winter . When I started the mower after changing oil,  the blade came loose and damaged the star on the original adapter. I though I may have done something wrong until I start reading the reviews for this replacement part . There is multiple reported problems of repeated failures of this item.

    Some reports that the bolt needs to torqued to at least 100 ft lbs and this will correct the issue with failure. Is there any truth to this or a recommended torque for the bolt?

    The original adapter is reported to be of better quality than this replacement. supposedly it had a separate key slot instead of it being part of the casting. Is this one available anywhere? The newly ordered part is labeled sintergy no matter which vendor I choose. Is this a genuine  Husqvarna part?

    Has any remedy for this problem been found ?  Maybe I will be lucky when I get and  install this replacement but other adapters of this type from this company are having the same failure problem.

     

    Photo:
  • scott wilson
    I have the Husqvarna HU775H mower and my question is where...7
    Parts Question posted April 19, 2015 by scott wilson 
    Question:
    I have the Husqvarna HU775H mower and my question is where to attach cable (Engage Drive Cable) to under the rear of mower to the drive (transmission)?

    I have looked with little help, I broke the original so that is no help.
  • Joe Bellassai
    I have a Craftsman lawn mower (917.377790) that was...6
    Parts Question posted August 31, 2016 by Joe Bellassai 
    Question:
    I have a Craftsman lawn mower (917.377790) that was made by American Yard Products which I understand is now part of Husqvarna. I'm having trouble locating the wheel height adjustment lever, p/n 160477X004 (alternate 532160477). Does anyone have a source for this part?

    Note: Bottom part of lever in photo is broken off.
    Photo:
  • David Shipley
    I have a part I do not know what it is? Below is a picture...5
    Parts Question posted June 6, 2016 by David Shipley 
    Question:
    I have a part I do not know what it is?
    Below is a picture of the part beside my receipt. the red part is what is in question. What is it aaaaand how do I use it?
    Thanks
    dtshipley@windstream.net
    Details:
  • Rocky Chaubey
    I bought a self propelled walk behind mower less than a year...Answeredescalated5
    Parts Question posted July 24, 2011 by Rocky Chaubey 
    Question:
    I bought a self propelled walk behind mower less than a year ago. The bag is not dust proof and by the time I am done mowing my yard, I have half a pound of dust in my lungs and am fully coated all over with a thick layer of dust! Most other manufacturers have dust proof bags. To make matters worse, the welding on either side of the bag handle broke. The receipt from Lowes was printed on thermal paper and has faded. I have finally located an auto repair shop in downtown Fort Worth that also doubles up as an authorized Husqvarna service center.

    Is a dust proof bag available for Husqvarna mowers? If yes, where can I find it? and BTW who thought of marketing these mowers with the "pass the dust through" bags?! It is a major pain and should have come up in field trials before this product was put on the market.
  • McCalister Nicholas
    I need a fuel cap for the Husqvarna Lc 221a. it has a Briggs...4
    Parts Question posted August 16, 2018 by McCalister Nicholas 
    Question:
    I need a fuel cap for the Husqvarna Lc 221a. it has a Briggs and Stratton engine, series 625EX.
  • john brown
    HU800AWD Drive cable spring is broken. It's the one the...3
    Parts Question posted May 28, 2017 by john brown 
    Question:
    HU800AWD Drive cable spring is broken. It's the one the cable passes through at the body end terminus. The upper hook/anchor portion of the spring is broken at 2.5 turns above the lower crooked end/anchor.

    The Husqvarna fiche doesn't show it as a separate part from the cable 581 95 21-01 nor do photos of the cable I've found at online parts retailer. I see 2 springs listed and pictures do not depict the remnants of the one I have.

    Is this spring included with the cable? Am I suffering from an advanced case of myopia? Is there a secrete part number I can order?

    Furthermore and finally...to what does the upper end hook?
    Details:
    Photo:
  • WILLIAM HOLBROOK
    Yes I have a model 961430006 walk behind mower & I need a...3
    Parts Question posted April 23, 2017 by WILLIAM HOLBROOK 
    Question:
    Yes I have a model 961430006 walk behind mower & I need a new safety cable. Your manual says the part number is 5321827-55 but when I search for that number nothing comes up. How can I get this cable if it's not listed on your site or anywheres online? Please help
    Photo:
  • Husq1810
    What's the part number for the pull start assembly on...3100%
    Parts Question posted April 21, 2017 by Husq1810 
    Question:
    What's the part number for the pull start assembly on model 55r21hva?

    Thanks!
    Photo:
  • Michael Fryberger
    I bought a HU775BBC mower last year from Amazon.com? Has...3
    Parts Question posted September 28, 2016 by Michael Fryberger 
    Question:
    I bought a HU775BBC mower last year from Amazon.com? Has this mower been discontinued? I contacted Parts Tree and gave them a Part # 581045203, replacement mower blade for this mower. Parts Tree says this Part# is no longer available because Model HU775BBC is no longer manufactured. Please advise ASAP. Thank you. Michael Fryberger