This is a public Forum  public

Posts

  • Vicente stitt
    I bought a poulan pro blower 6/10/12 is a reconstruct model...escalated
    General Product Question posted June 11, 2012 by Vicente stitt 
    Question:
    I bought a poulan pro blower 6/10/12 is a reconstruct model #bvm200vs and Im missing 3 parts already (2)elbow tubes and the high speed nozzle how do I get this parts do I have to take this back to the store. They told me they were no refunds, the store name is xmas tree shops.
  • Yves Pinet
    I bought a Poulan Pro Blower Model BVM210VS which came...escalated
    Parts Question posted May 12, 2012 by Yves Pinet 
    Question:
    I bought a Poulan Pro Blower Model BVM210VS which came without the pipes for the vacuum function or the J shaped tube for the pick up bag. Where can I get these parts?
  • van danielson
    I have a bvm200vs type 1, I am in need of the 2 o-ring...
    Parts Question posted December 9, 2014 by van danielson 
    Question:
    I have a bvm200vs type 1,
    I am in need of the 2 o-ring style of gaskets that go on either side of the carb adaptor. 1 gasket goes between the adaptor and the engin head, the other gasket goes between the adaptor and the carb.
    Ser 07275N200482-1
    Mod BVM 200vs

    For more info you may call me at
    208 362 3078 Boise, Id.

    Thanks so much
    Van Danielson
  • Chip White
    I have a BVM200VS, it had very low compression 60psi So...escalated
    Service & Maintenance Question posted May 13, 2013 by Chip White 
    I have a BVM200VS, it had very low compression 60psi

    So I bought a new cylinder and ring, the piston looks like new.

    After putting it back together it still only has 60psi.

    I'm baffeled on why??
  • Michael Dennis
    I have a Husqvarna 125B blower that is about one year old. I...escalated
    General Product Question posted June 27, 2013 by Michael Dennis 
    Question:
    I have a Husqvarna 125B blower that is about one year old. I tried to use it today but it would not start. When I pressed the purge bulb I noticed fuel leaking from the inside of the blower. The blower worked fined the last time that I used it about a week ago and before today I have never had a problem with it. Any Idea of what the problem could be?
  • Dean
    I have a new Poulan Pro Blower that I have used twice. I...Answered7
    Service & Maintenance Question posted July 5, 2010 by Dean 
    I have a new Poulan Pro Blower that I have used twice. I tried to use it for the third time and it will not start. I used the Oil mixture sent with the blower in a gallon of gas as instructed.

    It does not seem to be getting a spark of any kind. It doesn't come close to starting. I am very disappointed in this product.
  • Joseph Sobczak
    I have a Poulan blower PPB430VS, it starts up and runs but...escalated1
    General Product Question posted July 31, 2014 by Joseph Sobczak 
    Question:
    I have a Poulan blower PPB430VS, it starts up and runs but when I want to pull the trigger for more blow power it bogs down and wants to stall out. I changed the spark plug, cleaned the air filter and pulled out the gas filter and ran it with out the gas filter just to see if that was the issue but it wasn't any other idea's or suggestions I could try. Is there a carburetor adjustment I could try?
  • bob palmer
    i have a poulan pro 270 that looks like the husqvarna st...
    General Product Question posted February 22, 2015 by bob palmer 
    Question:
    i have a poulan pro 270 that looks like the husqvarna st 224. what options are available?
  • Brian Bownds
    I have a Poulan Pro Blower Vac Mulcher. It starts and runs...escalated1
    Service & Maintenance Question posted April 13, 2011 by Brian Bownds 
    I have a Poulan Pro Blower Vac Mulcher. It starts and runs but if I shut it off and let it sit more than a few minutes it will not restart. It is only 2 months old and I have only used it a few times. I use premium gas and good quality 2 stroke oil. I can run it as long as I want. I can shut it off and restart it within a minute or two without a problem. If it sits for more than a few minutes it wont start and the carb will not prime/purge, only air stays in the primer bulb. This is a new unit and shouldn't have these kind of problems, do I need to return the unit?
    Thanks,
    Brian B
  • Torrey Douglas
    I have a Poulan Pro Blower/Vac model BVM200FE. It was...escalated
    Warranty Question posted November 11, 2013 by Torrey Douglas 
    Question:
    I have a Poulan Pro Blower/Vac model BVM200FE. It was purchased from Lowe's on 4/2012. I have always used the correct gas to oil mixture and have used the supplied 2-stroke oil as the instructions directed. I never had an issue with the blower until recently. However, about a month ago it stalled out and will not start again. I recently replaced the spark plug for the make and model which I also purchased from Lowes as well. Once I replaced the spark plug, checking and setting the appropriate gap, I cleaned the fuel intake system including blowing out the fuel filter. According to the printed material packed with the blower, it would appear to be under warranty. I spoke with a representative that referred me to a local service repair shop called "The Lawnmower Shop" and he diagnosed that the blower lost compression in the cylinder and it's not covered under warranty. After I received the diagnosis, I immediately contacted the Poulan Service Center and the rep stated that this is an issue that Corporate covered in the past but due to the number of consumers having this exact same issue with different makes and models, they no longer cover this under warranty. This is really disappointing because the product was purchased with a 2 year warranty and is an obvious issue with the brand according to all the reviews that I failed to read before purchasing your product. I paid over $130.00 for this blower and cannot believe that you all refuse to repair it due to a known issue that's going on with different makes and models. Is there is anyone that cares enough about consumer and would do the right thing by following up with me regarding this matter? Also here's the Service Center Escalation # 93423279 from the call that I made today.

Filter by Date

< < March 2019 > >
S M T W T F S
          1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31            

Filter by Tag