Posts
Service & Maintenance Question posted November 18, 2016 by Victor VelardeMy Poulan Pro Snow Blower PR241 only drives in reverse and I was told that the bracket that holds the drive cable is broken. I was told that the plastic bracket is not very sturdy and that other snow blowers have had them replaced. My question is: Can Husqvarana have this bracket replaced with a metal one?- Service & Maintenance Question posted July 5, 2010 by DeanI have a new Poulan Pro Blower that I have used twice. I tried to use it for the third time and it will not start. I used the Oil mixture sent with the blower in a gallon of gas as instructed.
It does not seem to be getting a spark of any kind. It doesn't come close to starting. I am very disappointed in this product. - Warranty Question posted February 4, 2012 by Dennis KinneyQuestion:I purchased a new Poulan Pro blower from Lowes on June 5, 2010, which I registered right away. the blower quit running in May of 2011, so I took it to the local warranty repair center that charged me $30.00 to check it as I could not find the receipt. They proceeded to tell me the blower had a bad motor and would need replaced. I contacted the company and Lowes to find I had been sold a blower that was 4 years old but sold as new. This is crap. I had no warranty because of this and basically I am out the money for the blower and the diagnosis by the repair center. Is this a common practice? If it is, I will proceed to buy a Stihl blower to replace it since I want something I can rely on
Dennis Kinney
3856 Lockwood Ave
Toledo, Ohio
419-491-0147
kinneydr54@yahoo.com
p.s. The email I received when I registered the product said save this email. Why? It seem it is basically useless and only serves to oshow me how little customer service means to both companies - Service & Maintenance Question posted March 24, 2011 by brian blakeat the end of last season I purchased a blower and chain saw (both poulan). The blower was used about five times before winter and then stored in a basement. Several weeks ago, I got it out, filled with new gas and changed the spark plug to one that last the life of the equipment. it wont start. I checked the plug and cleaned the carb. The local service center says there may be a carb issue. Is this common on a new product? will this be necassary each season? I like poulan products and their price. I do not want to be consumed in maintenance each season. any suggestions?
- Service & Maintenance Question posted February 21, 2012 by Charles Fisher2 part question:
1) Why isn't there a snow thrower category?
2) Why won't my brand new snow thrower start? - Parts Question posted September 11, 2011 by Don WrightQuestion:I just bought a new chainsaw (PP4218AVX), but when I went to use it, there was no filler cap for the bar oil. I asked about it at Lowe's where I purchased it, and they referred me to the 800# in the manual. I have tried to call the number several times, but get no answer and it then it eventually disconnects. How do I get a filler cap for this?
- Warranty Question posted January 15, 2016 by robert stantonQuestion:why even offer a warranty? In reading all the comments in this forum I certainly am not alone here. Your warranty is a joke, as well as your product and most of your customer service reps.
- General Product Question posted July 31, 2014 by Joseph SobczakQuestion:I have a Poulan blower PPB430VS, it starts up and runs but when I want to pull the trigger for more blow power it bogs down and wants to stall out. I changed the spark plug, cleaned the air filter and pulled out the gas filter and ran it with out the gas filter just to see if that was the issue but it wasn't any other idea's or suggestions I could try. Is there a carburetor adjustment I could try?
- General Product Question posted May 2, 2012 by Jason MichaudQuestion:What is the difference between a Poulan blower model BVM200C and a model BVM200VS?? They appear to be the same blower. I am trying to decide which model to buy. Thank you. Jason
- Service & Maintenance Question posted March 28, 2012 by Richard OakleyJust had my blower checked at the local shop. Has compression of 30 and will not start. Ran great for about 15 minutes last week and then died. It is just over a year old. What do I do to get it replaced.
Filter by Date
| S | M | T | W | T | F | S |
|---|---|---|---|---|---|---|
| 1 | 2 | |||||
| 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| 17 | 18 | 19 | 20 | 21 | 22 | 23 |
| 24 | 25 | 26 | 27 | 28 | 29 | 30 |
| 31 |