Posts
Parts Question posted November 6, 2011 by Dennis YanchyckiQuestion:I require a new carburator float for my Model ST521E snowthower (Id plate info: Serial# S001809339960-34-6; codes 6241 & 601-5000-11)that I purchased years ago. I can't seem to find this model on your website and I can't find my manual to look up the part number. Will a local dealer be able to help me? Thanks, Dennis
Parts Question posted October 5, 2014 by Alan S.Question:I have a 924HVX and when I search for the parts listing the 924HV is the only parts listing that comes up. Since mine is a 2013 should I just use the listing for the most recent 924HV? EX: The
part # for the DISCHARGE BASE is 532 44 24-38. Is that the
correct part # for my HVX? Thanks- Parts Question posted December 30, 2015 by MinermanQuestion:I own a R322t mower with the 42" two-stage snow thrower attachment and need repair parts. I have only the manual showing how to attach the blower to the tractor. How can I get a parts manual and repair parts?
- Parts Question posted October 6, 2013 by Joshua MeyersQuestion:I have a Husqvarna Snow Blower model 10530SBE that needs a new engine. Original engine was Tecumseh LH358SA-159628A and I can't find an identical replacement. I need an alternate replacement engine model, can you help?
- Parts Question posted February 17, 2014 by Doug ZegaQuestion:I have a 10530SBE and the chute rotator cable has broken for the second time. To get this cable, I ordered the Husqvarna part (532 19 84-73). This is a $100 part and really overkill just to get a cable! I would like to know if Husqvarna sells the cables alone - as it is totally doable to install just a cable.
- Parts Question posted January 27, 2014 by MikeQuestion:In the manual, I don't see a part number for the shear bolts used on the impeller.
The dimensions of the shear bolts are given as
1/4-20 1 5/8"
I do see a part number for the shear bolts on the auger. So good to go on those.
Just looking to purchase to have shear bolts for the impeller, on hand too.
Husqvarna 14527E 96193006700 2010-05 Snow Thrower
Thanks,
Mike
Edit:
I see errors in the Manual, Page 17, the step to repeat when the auger belt slips off during assembly is incorrectly give as Step 12, should be Step 10.
The manual is also likely incorrect regarding the existence of impeller shear bolts.
The IPL on Page 2 lists this same location in the Key, item 10 as Part No. 874 78 04-26 Description Screw 1/4-20 X .625
There is a difference in the length of these bolts between the manual and the IPL.
Manual 1 5/8"
IPL .625 (5/8")
So I think this answers my question.
The manual is inaccurate, based on the IPL.Photo:
- Parts Question posted August 19, 2013 by emil reynoldsQuestion:I have purchased a Husqvarna yth22v46 lawn tractor and need to get the mounting brackets to mount my craftsman model 486.248392 42" 2 stage snow thrower. It appears to be the same snow thrower as required for my new tractor. The drive belt may also be different length.
I appreciate any help you can give. I am retired and living on social security and can ill afford buying a new snow blower.
Emil Reynolds
982 east county road 350 south
greencastle, in 46135
765-719-0169 - Parts Question posted November 16, 2014 by Greg HortenQuestion:My husqvarna 5hp snow blower won't start in the cold Model ST 521E
do you know the spark plug part no? - Parts Question posted November 10, 2013 by Thomas ChristopherQuestion:I recently acquired an older Craftsman Yard Tractor (model FF/24) with a snow blower attachment that requires a front-mounted PTO attachment. This PTO attachment was manufactured by American Yard Products, which, as I have learned, was bought out by Husqvarna. My tractor did not come with this PTO attachment and my snow blower is useless without it. Do you have any idea where I can get this PTO attachment (model number 917.263091) or one that would work in its place? Thank you for your help.
- Parts Question posted January 4, 2018 by Ricki DCQuestion:What is the correct spark plug replacement for ST523. The part number on the plug is J19LM-482. When searching, I get use 5161? Should I get the .030 gap or does it come preset?