Posts
General Product Question posted March 21, 2012 by Kim LicausiQuestion:I purchased a Poulan Pro string trimmer Model # PP335 966062901 6/14/2011. I've had to bring it in to the repair shop twice already because it would not start. The problem was corrected the first time by adjusting the carburetor. The second time the problem was corrected by changing the spark plug which had become corroded apparently from the fuel mixture.
Yesterday the string trimmer started but died whenever I tried to cut with it. Both the air filter and spark plug were covered with gas/oil mixture. The 2 previous times I used the string trimmer, my clothes smelled strongly of the string trimmer fuel mixture-this had never happened previously.
My questions: Why is the gas/fuel mixture fouling the air filter and spark plug? Is there anything that can be done to permanently correct the problem? Why do my clothes smell like fuel mixture after using the Poulan Pro?
I love the way this string trimmer cuts when it's working but I don't want to have gas all over my clothes after I use it nor do I wish to keep returning to my authorized service dealer for repairs. Thanks for any info.- Parts Question posted May 22, 2011 by Mike FinkenQuestion:I bought a 335 string trimmer and was wondering if you make a bigger guard to cover the head? I wear shorts when I do my lawn care and get stung by the grass clippings on my legs. The trimmer works great and I wish I would of bought it a long time ago.
- Service & Maintenance Question posted May 22, 2011 by robbie whitecottonQuestion:I purchased apoulan PP033 string trimmer recently when I cranked it up the strings head barely turns,,it was ASSEMBLED CORRECTLY what am I to do with it'
- Service & Maintenance Question posted August 10, 2011 by Ray BlairQuestion:I need to know what the clearance gap is for a ignition module and the fliwheel on a poulan pro ppb335
- Service & Maintenance Question posted July 2, 2010 by ScottyQuestion:I'd like to get the trimmer head for the P4500F to put on my P2500. Will it fit ?
- General Product Question posted August 30, 2011 by michael darmaninQuestion:I have a p335 that I bought in the spring of this year. Pull cord mechanism failed as I see many do. I cannot find my reciept. How do I get warranty coverage?
- Service & Maintenance Question posted August 17, 2011 by Gene SilcoxQuestion:I have a PPB300E String Trimmer. Starter rope broke. How do I get the housing off in order to get to the rope pully? Do I need to remove the Drum/Adapter? Do I use a torx bit on this to remove? Are there any direction on the best way to install the new rope? Thank you, Gene
- General Product Question posted September 29, 2011 by Charles BalchunasQuestion:Last week I purchased a new PP133 trimmer from Amazon. I have not used the trimmer for more than about 15 minutes so far--but have tried 6 times to start it and run it--every tim with the same problem. When I try to pull the starter cord it seems to jam after traveling about 2 inches---then after several tugs--it allows me to pull the cord fully----it will not start until I get to pull the cord fully a few times. It has done this every time I try to start it---the pull cord mechanism seems to jam--then it lets go and lets me pull it fully---could there be some problem with the pull starter mechanismDetails:
Brand new machine-----registered it with Poulan about a week ago------after I got it started and warmed up I had to turn idle speed scre up to avoid stalling when I released strigger--that works ok now---bit still have problem with jamming pull cord---afraid I will break the cord
- Service & Maintenance Question posted March 21, 2012 by Kim LicausiQuestion:I purchased a Poulan Pro string trimmer Model # PP335 966062901 6/14/2011. I've had to bring it in to the repair shop twice already because it would not start. The problem was corrected the first time by adjusting the carburetor. The second time the problem was corrected by changing the spark plug which had become corroded apparently from the fuel mixture.
Yesterday the string trimmer started but died whenever I tried to cut with it. Both the air filter and spark plug were covered with gas/oil mixture. The 2 previous times I used the string trimmer, my clothes smelled strongly of the string trimmer fuel mixture-this had never happened previously.
My questions: Why is the gas/fuel mixture fouling the air filter and spark plug? Is there anything that can be done to permanently correct the problem? Why do my clothes smell like fuel mixture after using the Poulan Pro?
I love the way this stringtrimmer cuts when it's working but I don't want to have gas all over my clothes after I use it nor do I wish to keep returning to my authorized service dealer for repairs. Thanks for any info. - Parts Question posted November 9, 2011 by David DunlapQuestion:I have a pp338pt, and I want to buy an extra chain.
I find two different part numbers.
PWE
530051524
SKU
952-051549
Are they the same chain? They look the same.
Filter by Date
| S | M | T | W | T | F | S |
|---|---|---|---|---|---|---|
| 1 | 2 | |||||
| 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| 17 | 18 | 19 | 20 | 21 | 22 | 23 |
| 24 | 25 | 26 | 27 | 28 | 29 | 30 |
| 31 |