This is a public Forum  public

Posts

  • Kenneth Baran
    Where can I find my local authorized repair facility for...
    Warranty Question posted September 5, 2017 by Kenneth Baran 
    Question:
    Where can I find my local authorized repair facility for warranty work on my HU700F mower?
  • Bruce Lowrey
    Model # 960430177-00, Serial Number 050516A 006280. Purchase...
    Warranty Question posted August 13, 2017 by Bruce Lowrey 
    Question:
    Model # 960430177-00, Serial Number 050516A 006280. Purchase date 5-2-2017

    I would like to receive another smart switch under warranty and I'll return this one. How do I go about doing this?
    Better still, I'd like to simply replace this smart switch with the equivalent manual switch. It seems a lot of folks have trouble with the safety switch, according to many comments on Google.

    Please contact me at 985-778-3303
  • Daniel Rosenheim
    Day before yesterday while mowing my mower started to smoke...
    Warranty Question posted August 9, 2017 by Daniel Rosenheim 
    Question:
    Day before yesterday while mowing my mower started to smoke under the hood and in just a few seconds was in flames. I was far enough from the house that water was not immediately available so by the time a got back to put out the fire the entire mover was engulfed. It completely burnt to the ground. It was a 48" riding mower with only 212 hours on it. I was wondering if this had occurred with other mowers or maybe there was a recall for something that I missed. I am looking for answers. Thanks
  • Maxim Tulupnikov
    My lawn mower (HU725AWD, MODEL # 961450028 00, S/N...
    Warranty Question posted July 5, 2017 by Maxim Tulupnikov 
    Question:
    My lawn mower (HU725AWD, MODEL # 961450028 00, S/N 022316M009435) stopped working after one year of very rare and careful use. Last summer I used it every 3 weeks on my 0.6 acre lawn, and a couple of times this year, then it wouldn't start. I also got a letter about a safety recall of my model last fall. Right now the machine is in the repair shop with the Husqvarna local service center in CT, Benedict's Home & Garden in Monroe, CT. The dealer refuses to repair the equipment under the 3-year warranty, or the recall letter. Please contact the dealer and resolve the warranty/recall case. I would like to receive back my machine in working condition. I own other Husqvarna equipment, and I'd like to rely on the quality of your products.
  • Theresa Lucas
    The registration form doesn't recognize the product...4
    Warranty Question posted June 17, 2017 by Theresa Lucas 
    Question:
    The registration form doesn't recognize the product chosen from the form search screen.
  • Bill White
    I just purchased a Husqvarna HU725AWDEX (22")...
    Warranty Question posted June 5, 2017 by Bill White 
    Question:
    I just purchased a Husqvarna HU725AWDEX (22") 163cc Self-Propelled All-Wheel Drive Lawn Mower w/ Electric Start
    I received it on May 27th and when I tried to adjust the height of the right front wheel I found the adjuster was turned to the point it was completely under the deck of the lawn mower. I was able to get the adjuster lever back to its proper place even though now the adjuster lever is somewhat loose along with the wheel.
    On June 3rd I noticed the same issue with the adjuster lever on the left rear wheel. That it had become loose and was under the deck. As I started to move the adjuster lever back to its proper position, I could see that the entire left rear wheel and adjuster lever is now loose to the point that the adjuster lever will not stay in the position I place it and the adjuster lever will rotate until it is again under the daeck. Please provide information for this warranty issue.
  • Craig Gripentrog
    Need registration help please. I'm trying to register...4
    Warranty Question posted June 3, 2017 by Craig Gripentrog 
    Question:
    Need registration help please.

    I'm trying to register a Husqvarna mower and trimmer. I can enter all the required information but the model box wont allow me to enter the model. I can find the product number in the search box but it doesn't enter model.
  • Kristyn Corace
    Hi, Here is my registration information: Confirmation...
    Warranty Question posted May 26, 2017 by Kristyn Corace 
    Question:
    Hi,
    Here is my registration information: Confirmation Number: 161010-003145

    Name: Kristyn Corace
    Address: 203 willard clark circle
    Spotswood, NJ, 08884
    Model: HU725AWD
    Serial: 04116M025360
    Purchase Date: 09/03/2016
    Warranty: 2

    We did not open the mower until this spring. After opening, we added oil, checked it, all good. We mowed once-GREAT, we mowed twice-GREAT, on the third mow it just stopped. We could not get it started again. We took it to PANTANO POWER EQUIPMENT
    143 FREEHOLD ROAD
    MANALAPAN, NJ 07726
    They said that there was no oil in it and they did not believe that the warranty would cover this. We said that there must be a problem why the engine used all of the oil up that quickly in just 2 1/2 mows. They said if we paid $105 diagnostic fee, they would take it apart and see what the whole problem was. But, they still didn't think it would be covered. If it isn't covered, we would be out our $105.

    We are very confused. This is not our first mower, of course we know to add oil; which we did. Can you please help us?

    Thank you.
    Kristyn Corace
    kris.cor@verizon.net
  • David Ketchum
    Had mower for less than 2 weeks and mower handlebar came...
    Warranty Question posted May 15, 2017 by David Ketchum 
    Question:
    Had mower for less than 2 weeks and mower handlebar came loose from body and the nut is gone. See pictures. mower was registered last week.
  • craig boos
    Hello, I purchased a new LC221A walk behind mower today ,...
    Warranty Question posted May 3, 2017 by craig boos 
    Question:
    Hello,
    I purchased a new LC221A walk behind mower today , new - from Lowes. While preparing it for 1st use, it was clear that lower locking handles were partially stripped. I was able to get the left side to eventually grab, but the right side handle just spins and will not tighten or grab. It is clearly defective and since it doesn't tighten, the handle leans right and doesn't stay engaged in the locking hole, since the knob can not be tightened on that side.

    I need to get a replacement handle/screw for that side-