This is a public Forum  public

Posts

  • Ken McCain
    I bought a RZ5424 zero turn mover on 7/7/2015. The main seam...1
    Warranty Question posted October 6, 2016 by Ken McCain 
    Question:
    I bought a RZ5424 zero turn mover on 7/7/2015. The main seam on the right hydro unit is leaking oil around the gasket. Is this covered under ? How do i varify this to my local dealer?
  • Paul Burleigh
    This spring I purchased an MZT61 and I've had some...
    Warranty Question posted September 29, 2016 by Paul Burleigh 
    Question:
    This spring I purchased an MZT61 and I've had some issues with the mower deck. So far I've had two spindles go bad and recently it started mowing bad, the center blade was cutting closer than the rest. I replaced that spindle (one of the two) but it didn't fix the problem. I decided to raise the mower deck and do some measuring and found that the center spindle mounting area of the mower deck was bent enough to make the blade cut closer. measuring from the blade to the mower deck from end to end it was about 3/8" difference. I'm starting to regret my purchase, I had no issues with my last Husqvarna 42" zero turn with a stamped deck. I went to a heavy duty mower and now I start having issues. That just doesn't make sense. I use this on my own property mowing about 4 acres of grass, the worst thing I've hit was sticks in the grass or dirt around a mole hole. Nothing that should be effecting the mower deck nor the spindles.
  • Stephen Harmon
    I recently purchased a double bagger for my zero turn and it...
    Warranty Question posted August 22, 2016 by Stephen Harmon 
    Question:
    I recently purchased a double bagger for my zero turn and it is not performing as expected, Is there a return policy for this product as I am very dissatisfied with its ability
  • James Davis
    I have a RZ5426 Zero turn that I purchased from Lowes in...
    Warranty Question posted August 16, 2016 by James Davis 
    Question:
    I have a RZ5426 Zero turn that I purchased from Lowes in June of 2013. The problem I have is the deck has a broken weld on the back support bracket. The deck has a 10 year limited warranty, where do I take it to get a replacement deck?

    Thanks

    Husqvarna
    Md# RZ5426
    Product #967003602
  • Dennis Teer
    I purchased a Z248F on 3/27/2015 and the mower currently has...2
    Warranty Question posted July 14, 2016 by Dennis Teer 
    Question:
    I purchased a Z248F on 3/27/2015 and the mower currently has 28.8 hours. On 7/3/2016 I could not mow for the holiday because the drive pulley melted off (see picture of pulley). I took the Mower to the dealer I purchased from and they replaced the part under warranty and I also had the break in oil changed. If this is an engineering defect will Husqvarna improve this part to avoid this in the future (Bad Boy has already upgraded this same part to metal) so customers can feel at ease? In this case if it is not to be upgraded can customers believe Husqvarna should allow all mowers using this part be allowed to purchase the extended warranty without their stipulations noted.
    DT
  • Robert Hodge
    Zero-Turn mower out of warranty - Possible design flaw....7
    Warranty Question posted July 13, 2016 by Robert Hodge 
    Question:
    Zero-Turn mower out of warranty - Possible design flaw....
  • Matt Myers
    I just bought a Model: Z254 Purchase Date: 03/28/2016...1
    Warranty Question posted May 20, 2016 by Matt Myers 
    Question:
    I just bought a Model: Z254 Purchase Date: 03/28/2016
    Warranty: 3 Year Limited
    The front right wheel was bent the skid plate underneath deck was bent instead of sending it back like I should have in retrospect I fixed it myself. It has been a wet spring so not used much but now i can't get it to mow level keeps leaving grass behind it not cut I have tried to adjust height to level but it still won't mow right have to mow yard twice to get all of the grass cut and a somewhat level cut. I can't send it back Amazon has only 30 day return will Husqvarna fix this. Thanks
  • ralph bisceglie
    purchase ez4824 in sept ready for the 5 hr oil change notice...
    Warranty Question posted March 29, 2016 by ralph bisceglie 
    Question:
    purchase ez4824 in sept ready for the 5 hr oil change notice the transaxle expanson tank is bone dry its brand new n also the hr meter does not work is this covered if i bring it in for warranty where do i find out whats covered
  • Glenn Landry
    Unable to register my Zero Turn Mower1
    Warranty Question posted March 3, 2016 by Glenn Landry 
    Question:
    Unable to register my Zero Turn Mower
  • Tim Wernicke
    Hi, just bought my new Z 246 Zero Turn mower and I'm...1
    Warranty Question posted November 11, 2015 by Tim Wernicke 
    Question:
    Hi, just bought my new Z 246 Zero Turn mower and I'm trying to register it for the warranty and to get by rebate. But, I'm not having any luck finding the serial number. Help!