Posts
Parts Question posted August 25, 2016 by Robert MullerQuestion:I have a 125BVX handheld leaf blower that's never run quite right.
I'm fairly sure there's crud in the carb.
I've removed it, but the thing has not been designed for rebuild.
How can I get a new one?
(My local dealers can't find the pull start much less fix it, so they aren't touching the *** thing. Besides, the idiots will charge me more than I paid for anew one.)- Parts Question posted February 28, 2015 by Bobby HaddenQuestion:Backpack blower 130BT. Need the middle piece of the tube and can't find a piece to match up on the ends.Photo:
- Parts Question posted August 18, 2016 by Tom BlackmonQuestion:Having a problem identifying the correct spark plug (RCJ6Y??) for model 125B leaf blower SKU# 952711925, sn 20123405350. The head appears that the plug needs to be a beveled surface type plug and without sealing washer. Where am I going wrong?? Thanks in advance for your assistance! TomB
- Parts Question posted March 5, 2016 by Robert CarlsonQuestion:i have a husqvarna 125bt, and the primer bulb won't prime. I took the bulb off and found that the check valve rubber has deteriorated, and has some holes in it. I would imagine that's why the primer doesn't work, but the part # 531009621 shows that it's no longer available. Are there any alternatives to this piece? Seems silly to trash a leaf blower over a $.05 piece. any help is appreciated.Photo:
- Parts Question posted November 21, 2011 by Jeff ShaferQuestion:Husky 125B Blower - High Velocity Nozzle?Details:
I purchased a Husquevarna 125B blower from Lowes (off the shelf, no box) this weekend. Since I don't have the box or original packaging, I don't know if the blower should have come with a high velocity nozzle (flattened at end). I visited both the Lowes website and the Husky website and it isn't clear whether the 125B (packaged for Lowes) should have included the HVN. Does anyone here know?
Thanks
- Parts Question posted November 26, 2018 by Tom GrigsbyQuestion:How do I determine if I need a replacement grommet for the Husqvarna 570BTS Leaf Blower?Details:
The return fuel line has become detached from the fuel tank grommet.
I cannot determine if the line is supposed to feed through the hole, or if a nipple has been broken off that the line would normally be attached to.The yellow line appears to be way too big to fit through the hole.
I cannot find any photographs with sufficient detail to determine if a replacement is required.Photo:
- Parts Question posted December 4, 2016 by Mike KeeslerQuestion:I have leaf blower 125BVX. Can the removeable collar on the upper leaf blower vac tube be replaced? The part number for the upper leaf blower tube is 545131201.
The collar on my blower is broken and I do not want to replace the entire upper leaf blower tube. - Parts Question posted November 28, 2016 by MARK SQuestion:model # - 125BV
Cable broke....looking to replace the entire recoil starter assy cannot find parts manual on website or any help on the website whatsoever. Is there a part # that encompasses the whole assy? - Parts Question posted October 18, 2016 by Bryan SnyderQuestion:I need to replace the fuel and breather lines on my 145BT leaf blower that was made 10/98. Can the ID and OD of the lines needed for the replacement be shared? The two part numbers are 531 00 44 34 and 531 00 44 35. Also, is there a preference relative to manufacturer for the lines? Thanks.
Bryan - Parts Question posted August 3, 2016 by Johnny RunnetteQuestion:I owe a 125 BVx leaf blower. I need to buy a new bag. How do I do that? Johnny Runnette