Brandon M.

Hello Jr. C,

Thank you for using Answer Army.  Within the Lubrication section of your Owner's Manual there should be a page referencing "Transmission Fluid Change."  This section speaks about replacing the fluid and explains the expansion tanks briefly.  If the engine is cold then the tanks should be at the "FULL COLD" level or approximately 23 additional ounces.  If not, then tranmission fluid should be added with 20W50 motor oil.  Please feel free to reference this section for further details and thank you again for using Answer Army.

Thank you,

Brandon

 Hello Mike,

Thank you for using Answer Army.  You are correct that there should be a purple and black wire connected to the hour meter.  A schematic drawing is located in your Owner's Manual on page 49.  This will help show the routing of the wires and the wiring labels.  Although, I trust that you have great experience, I must state to use caution and always wear your recommended safety equipment when working.  Please let me know if this works and thanks again for using Answer Army.

Thank you,

Brandon

 Chris,

Thank you for contacting us at Answer Army.  We will be sure to inform our teams again to be aware of the new Warranty policies, such as, the one you are questioning.  Below is the direct message from the warranty policy.

Reinforced Stamped (Armor Protected) 10 Year Limited & Fabricated Limited Lifetime, Deck Warranties.

These Limited Warranties are for the deck shell only – mechanical components/parts such as belts, pulleys, spindle housings, bearings, blades, rods, height adjusters, caster/anti scalp wheels etc… are NOT covered. The Limited Lifetime Warranty does not cover damage other than that resulting from defects in material or workmanship. The following are NOT considered defects in material or workmanship, and therefore are NOT covered:

(a) Abrasion to mower decks, including sand wear;

(b) Damage to cutting equipment by way of contact with, rocks, or other non-approved materials and/or structures;

(c) Rust and corrosion; and

(d) Natural discoloration of paint or other materials due to ultraviolet light.

 Hello Timothy,

Thank you for contacting us through Answer Army.  The mulch kit part number for an RZ4623 is 531309580.  Feel free to contact your local authorized Husqvarna Dealer for pricing and purchasing.  Thanks again for your question and using Answer Army.

Thank you,

Brandon

 Brian,

Thank you for using Answer Army.  When the PZ7234FX was first released the engine was a Kawasaki FX921 and it remains to be the same engine model.  The only difference is that Kawasaki has adjusted their Horsepower ratings for their engines.  The FX921 is still the same engine but now with a 31hp rating instead of the original 34hp rating.  For more information about Kawasaki's horsepower rating adjustments please visit the Kawasaki website.

Thank you again for your question and using Answer Army.

 David,

The mulch kit part number for the 54" PZ Series is 966407101.  This accessory along with many others are sold at authorized Husqvarna dealers.  Please visit the dealer locator to find the one nearest you.

Thank you for using Answer Army.

 Joe,

Thanks for using Answer Army.  The weight of the MZ6128ZT by itself is 770 lbs.  The main difference between these two units are the engines with one having a B&S Endurance and the Sears unit with a B&S Professional.  The MZ6128ZT is a great model with its HydroGear ZT3400 drive system will be great for larger properties and will allow you to mow up to 10 mph.

Thanks for using Answer Army and let us know if you have any other questions.